7747 help

**jim_in_dorris** · 12-22-2015

Mike, I would data log first to see where you are. When you add the 2 tables and come up with more than 100% you will need to make some adjustments. Dave W will be better able to answer those types of questions, but there are a lot of threads on here about that

**mikes willy** · 12-22-2015

Originally Posted by jim_in_dorris

Mike, I would data log first to see where you are. When you add the 2 tables and come up with more than 100% you will need to make some adjustments. Dave W will be better able to answer those types of questions, but there are a lot of threads on here about that

Yeah I've read a bunch on how to do it and why. Just wasn't sure if I should do it before trying to adjust the VE or do 1st logging and tune then combine then log and tune some more. Cool I'll get some data over the next couple days. I did start it in the garage and it seam good if I roll on the throttle but mashing it it hesitates. But the over whelming smell of exhaust is way better Thanks

**mikes willy** · 12-22-2015

There are really good tutitorials in this forum
Attachment 10032 Attachment 10033

**mikes willy** · 12-24-2015

So i got some Dataloging in last night. i used tuner pro rt with the auto prom. When i stopped the recording It asked to save so I saved it to the desktop of my laptop. I then put that file on a thumb drive to move to my computer desktop with excel to use the spreadsheet calculator. When I opened the file in tuner pro on my desktop I had to play the file to get the history to fill in. However it does not match my laptop that used to datalog. Anyone know whats going on there? also to get the history to fill in i had to push the play button several times and it slowly filled in. I'm I doing something wrong? It was saved as a .XDL file. I tried to export the file from the laptop to a thumb drive and it saved it as an excel file. Any suggestions?

It did run great compared to before. No hesitations and the blm numbers don't look that bad so far.

**jim_in_dorris** · 12-24-2015

Post the log and I will take a look. Usually trying to open a file in something other than what created it can cause file associations to change, they may need to be reset

**mikes willy** · 12-24-2015

Originally Posted by jim_in_dorris

Post the log and I will take a look. Usually trying to open a file in something other than what created it can cause file associations to change, they may need to be reset

It won't let me upload the excel file. It has a .csv ending to it. My concern it that it doesn't match the laptop ( this file is from the desktop ) thanks for the help.

Originally Posted by lionelhutz

Do you have the same adx file open in both program instances? I'm not sure if this affects the log or not but with having to play it back I wouldn't be surprised if it does. I've always exported the log to a CSV or XL file before closing it so I've never re-opened a log file to look at it again.

I do. They both have identical stuff except excel. I am running it thru parallels on the mac though.

**mikes willy** · 12-24-2015

this one is from the laptop. the actual one saved after the recording stopped

files are the same size so I must e doing something wrong on the desktop end

**lionelhutz** · 12-24-2015

Do you have the same adx file open in both program instances? I'm not sure if this affects the log or not but with having to play it back I wouldn't be surprised if it does. I've always exported the log to a CSV or XL file before closing it so I've never re-opened a log file to look at it again.