10-4. I see it's gone.
I'll be flashing my PCM for my LS Swap here soon. Going for a first fire before Christmas.
10-4. I see it's gone.
I'll be flashing my PCM for my LS Swap here soon. Going for a first fire before Christmas.
Don't worry about extra versions. It's great that you're still iterating on it.
It's not reasonable for anyone to expect something this big and this complicated to be perfect on the first shot.
Solid!
Merry Christmas to All!
It went off without a hitch. Removed fuel pump relay, cranked engine over with starter until I showed oil pressure on the gauge. Replaced relay, and primed a couple times with the key set in Run. Twisted her to start and she fired up strong and idled down perfectly. All well!
There is currently an issue with several parameters under the fueling heading. Please do NOT attempt to make changes there. Once I get them fixed I'll post up a new version and it will also include a few new parameters.
Most all issues have been resolved in version 7. I moved it to the link below. Please look at the readme file as well as there are a couple issues still. I can't currently update the original post but will once that is worked out.
https://github.com/persingc/12587603
Again if you find a problem please let me know.
Most all issues have been resolved in version 7. I moved it to the link below. Please look at the readme file as well as there are a couple issues still. I can't currently update the original post but will once that is worked out.
https://github.com/persingc/12587603
Again if you find a problem please let me know.
Version 8 is now available at the link above. All diagnostic fields have been verified\fixed, All parameters sorted, previous issues resolved, and a few descriptions added.
Again if you find a problem please let me know.
Version 8 is now available at the link above. All diagnostic fields have been verified\fixed, All parameters sorted, previous issues resolved, and a few descriptions added.
Again if you find a problem please let me know.
Hello,
OK, I must be some kind of idiot but I can't seem to download Version 8 from the github site. I can get a text web page version of it but nothing packed into a standard 1.42 megabyte usable XDF file.
Clueless here. What am I doing wrong?
Rick
1970 Chevy El Camino, LM7 Engine, 4L60E - Two 896 and two 0411 PCM's
same
Bookmarks