Mother of all 7603 XDF files

[coldsteelmike]

10-4. I see it's gone.

I'll be flashing my PCM for my LS Swap here soon. Going for a first fire before Christmas.

[NSFW]

Don't worry about extra versions. It's great that you're still iterating on it.

It's not reasonable for anyone to expect something this big and this complicated to be perfect on the first shot.

[persingc]

10-4. I see it's gone.

I'll be flashing my PCM for my LS Swap here soon. Going for a first fire before Christmas.

Version 5 with additional ETC parameters and comments.

[coldsteelmike]

Solid!

Merry Christmas to All!

[persingc]

Solid!

Merry Christmas to All!

How did your first fire up go?

[coldsteelmike]

How did your first fire up go?

It went off without a hitch. Removed fuel pump relay, cranked engine over with starter until I showed oil pressure on the gauge. Replaced relay, and primed a couple times with the key set in Run. Twisted her to start and she fired up strong and idled down perfectly. All well!

[persingc]

It went off without a hitch. Removed fuel pump relay, cranked engine over with starter until I showed oil pressure on the gauge. Replaced relay, and primed a couple times with the key set in Run. Twisted her to start and she fired up strong and idled down perfectly. All well!

PM sent.

[persingc]

There is currently an issue with several parameters under the fueling heading. Please do NOT attempt to make changes there. Once I get them fixed I'll post up a new version and it will also include a few new parameters.

[persingc]

There is currently an issue with several parameters under the fueling heading. Please do NOT attempt to make changes there. Once I get them fixed I'll post up a new version and it will also include a few new parameters.

Most all issues have been resolved in version 7. I moved it to the link below. Please look at the readme file as well as there are a couple issues still. I can't currently update the original post but will once that is worked out.

https://github.com/persingc/12587603

Again if you find a problem please let me know.

[persingc]

There is currently an issue with several parameters under the fueling heading. Please do NOT attempt to make changes there. Once I get them fixed I'll post up a new version and it will also include a few new parameters.

Most all issues have been resolved in version 7. I moved it to the link below. Please look at the readme file as well as there are a couple issues still. I can't currently update the original post but will once that is worked out.

https://github.com/persingc/12587603

Again if you find a problem please let me know.

[persingc]

Version 8 is now available at the link above. All diagnostic fields have been verified\fixed, All parameters sorted, previous issues resolved, and a few descriptions added.

Again if you find a problem please let me know.

[persingc]

Version 8 is now available at the link above. All diagnostic fields have been verified\fixed, All parameters sorted, previous issues resolved, and a few descriptions added.

Again if you find a problem please let me know.

[B52Bombardier1]

Hello,

OK, I must be some kind of idiot but I can't seem to download Version 8 from the github site. I can get a text web page version of it but nothing packed into a standard 1.42 megabyte usable XDF file.

Clueless here. What am I doing wrong?

Rick

[persingc]

Hello,

OK, I must be some kind of idiot but I can't seem to download Version 8 from the github site. I can get a text web page version of it but nothing packed into a standard 1.42 megabyte usable XDF file.

Clueless here. What am I doing wrong?

Rick

Try right clicking the file and selecting save target as. Worse case copy all of the text and save it into a txt file and then change the file extension from txt to xdf

[Midnightmechanic]

same