Ok, log329.xdl and patch.adx go together; both files with reduced go together also. Originally I had the added PIDs at the bottom of the commands list and wondered if it would only receixe X amount of data. So I made another one that reduced the overall PIDs and dispersed them in between the standard ones so they weren't at the bottom of the list. That's how I discovered that the added PIDs get filled in with the data from the standard PIDs immediately before them.
Hopefully you can discover something I did wrong! haha
BTW: that b1s1 adx had the wideband charged to just read bank 1 sensor 1 narrowband o2 voltage. It appeared to be correct while driving.
Bookmarks