Tunning For Better Throttle Response

[84Elky]

you will have to excuse my ignorance but cant find injector duty cycle listed in the bin file. I do now my BPW on my data log is about 10.5 when going to about 4000 rpm. under the tables section I do see injector pulse width low offset vs base pulse with

1. Could you explain exactly what you mean by "tuning for better throttle response". Many ways to interpret -- want faster revs with throttle pop, bogging at throttle pop, slightly stalling at tip-in, etc.
2. The Analyzer will give you everything you need to know about your injectors + much more about your tune here: http://www.gearhead-efi.com/Fuel-Inj...-File-Analyzer. Despite title, is NOT restricted to just S_AUJP v5. Will analyze any .csv, xls or xlsx file

Sample:
Injectorr Info.jpg

HTH