Quote Originally Posted by In-Tech View Post
Hiya,
Just do whatever you want. I like having the ability to do ALL of it, shite, I have adapters to even do MB BGA's to 24 pin if I wanted to. And yes, the ability to program the stock memcal's without an adapter, like others, is invaluable.

Also, yes the 2732's can be a pain. You can read any of them easily...for programming, start at 12v, no go, go to 21v, and then to 24v till it verifies. Not an issue if you have equipment.
spray and pray.. classy. Or you could look at the data sheets, and see that a real 27C32 takes 25v to write, and a 2732A takes 21v. I don't think the spray and pray method is the greatest idea when dealing with electronics and voltages. I prefer facts and ease of use. I Use a newer flash chip and you don't have to worry about the erase, vs program voltage.