5.7 and 4l80e trans unsure what bin.

[smith]

I have a 1995 K2500 5.7L that i put into a 1996 k3500 that had the diesel 6.5 in it. The 95 had the ecm 16197427 BJYL. The original truck had the 4l60e transmission and the newer truck that the engine went into has the 4l80e. I'm looking at prob either a OE or 31 bin file but I'm unsure what to start off with. This is not going to be anything too special, delivering firewood, work truck etc. It does have a lower stall converter at 1800 but from the research i read it should be fine. Anyways any help pointing me in the right direction would be great.

[dave w]

There are a few $OE .bin files here: http://www.gearhead-efi.com/Fuel-Injection/showthread.php?337-16196395-PCM-Information-OE

There are a few $31 .bin files here: http://www.gearhead-efi.com/Fuel-Injection/showthread.php?338-16156930-PCM-Information-31

dave w

[Scrufdog]

You're installing whats in my Burb. 16197427 with BNKM bin, $31 mask. I can send you my bin and tweaked adx file if you want.

[Fast355]

You're installing whats in my Burb. 16197427 with BNKM bin, $31 mask. I can send you my bin and tweaked adx file if you want.

BNKM is what is in the 1-ton 350/4L80E vans as well. Just add the input shaft speed sensor wiring and move a few pins around in the transmission connector and you are good to go. On the Express I had to extend the harness for the transmission to reach the driverside.

[smith]

Thanks for the help, i will give the stock BNKM bin a try and see how that works. I already did the pin swap before the engine went in and the input shaft sensor as well.

[Scrufdog]

Here ya go. Cant attach files in PM

The adx file has been corrected so that the history BLM tables match the VE tables and Correction Excel sheets.

[Scrufdog]

Dont forget to change the mask from $31 to $AA to disable checksum

[smith]

Anybody know the differences with the different masks? BNKM, BXSJ, BJDR etc

[dave w]

Anybody know the differences with the different masks? BNKM, BXSJ, BJDR etc

TunerPro has a compare feature. Load the compare .bin file ~ From the tools menu select difference tool.

dave w

[smith]

I will give it a shot when i know what i'm looking for. I also move it around the yard some with the bin that scruff gave me, seems to be working fine so far. I won't have it on the road for a week or two, i will post a log when i do.

[EagleMark]

Anybody know the differences with the different masks? BNKM, BXSJ, BJDR etcThat would be BCC Broadcast Code when comparing in the same Mask. Mask is the overall roadmap that shows us where the Parameters are!

[smith]

Thanks for the correction i'm still trying to get all the terms down.

[EagleMark]

:rockon:

[smith]

I went with that stock bin and everything seems to be working fine and running well. I appreciate the help.

[Scrufdog]

Glad it worked out.