so i try to clone bin onto my 2005 gmc pcm it goes most the way but come up that my pcm size is 0 mb instead of 1 mb
so now my truck wont start
any help would be great
so i try to clone bin onto my 2005 gmc pcm it goes most the way but come up that my pcm size is 0 mb instead of 1 mb
so now my truck wont start
any help would be great
Are you using PCM Hammer?Originally Posted by mullettcar
PCM Hammer Start Screen.jpg
yes
[04:56:09:548] Changing PCM to operating system 12592618
[04:56:09:578] Flash chip: AMD AM29F800BB, 1mb
[04:56:09:592] File size 1,048,576 does not match PCM size 0. This image is not compatible with this PCM.
[04:56:09:628] Clearing trouble codes.
[04:56:10:724] Elapsed time 00:00:05.6209198
[04:56:49:992] C:\Users\vemtm\Downloads\05 Chevy 1500 4x4 MPV L59 12592618.bin
[04:56:50:070] Validating 1024k file.
[04:56:50:088] Start End Stored Needed Verdict Segment Name
[04:56:50:112] 00000 FFFFD 8988 8988 Good Operating system
[04:56:50:149] 08002 15FEF B206 B206 Good Engine calibration
[04:56:50:187] 15FF2 1912F 5B25 5B25 Good Engine diagnostics.
[04:56:50:226] 19132 1D3AF 3D8A 3D8A Good Transmission calibration
[04:56:50:273] 1D3B2 1DCAF DE05 DE05 Good Transmission diagnostics
[04:56:50:316] 1DCB2 1F6AF 13B5 13B5 Good Fuel system
[04:56:50:334] 1F6B2 1FF9F 7A71 7A71 Good System
[04:56:50:347] 1FFA2 1FFEF F906 F906 Good Speedometer
[04:56:50:397] PCM and file are both for the same Hardware P01_P59
[04:56:50:427] Operating system IDs do not match.
[04:56:50:463] PCM operating system ID: 10
[04:56:50:497] File operating system ID: 12592618
[04:56:50:531] Changing PCM to operating system 12592618
[04:56:50:612] PCM Unlock not required
[04:56:50:623] Unlock succeeded.
[04:56:50:640] Attempting switch to VPW 4x
[04:56:50:664] Module 0x60 (driver information display) has agreed to enter high-speed mode.
[04:56:50:810] Module 0x10 (engine controller) has agreed to enter high-speed mode.
[04:56:50:969] Module 0x16 (engine controller) has agreed to enter high-speed mode.
[04:56:51:126] Module 0x40 (body controller) has agreed to enter high-speed mode.
[04:56:51:286] Module 0x98 (climate control (HVAC)) has agreed to enter high-speed mode.
[04:56:53:259] Kernel upload 48% complete.
[04:56:54:107] Kernel upload 100% complete.
[04:56:55:689] Kernel Version: 00000000
[04:56:55:724] Kernel uploaded to PCM succesfully.
[04:57:00:794] Changing PCM to operating system 12592618
[04:57:15:921] Unable to determine which flash chip is in this PCM
[04:57:15:931] Unsupported flash chip ID 00000000. Manufacturer: Unknown
The flash memory in this PCM is not supported by this version of PCM Hammer.
Please look for a thread about this at pcmhacking.net, or create one if necessary.
We do aim to add support for all flash chips eventually.
[04:57:15:947] Something went wrong. Error in the application.
[04:57:15:965] Do not power off the PCM! Do not exit this program!
[04:57:15:986] Try flashing again. If errors continue, seek help online.
[04:57:16:004] https://pcmhacking.net/forums/viewtopic.php?f=42&t=6080
long story short i was messing around with my pcm cause my truck is a 4.8 l but i have ordered a 5.3 so i started messing around and put a 5.3 bin on but i lost my 4.8 bin and now i cant get either to load
The log shows:
[04:57:15:921] Unable to determine which flash chip is in this PCM
[04:57:15:931] Unsupported flash chip ID 00000000. Manufacturer: Unknown
The flash memory in this PCM is not supported by this version of PCM Hammer.
Please look for a thread about this at pcmhacking.net, or create one if necessary.
We do aim to add support for all flash chips eventually.
Maybe you know someone with tuning software that can try a PCM recovery flash with the original .bin file?
Maybe try Universal Patcher? https://universalpatcher.net/
Posting Permissions
Reply With Quote
Bookmarks