Need AANK BIN file please.

[Rich_Williams]

Hi All, I've looked all over the place, at least the places that I know of, for an AANK.bin file for TunerPro RT. My ECU is 1227165 and I cannot find an AANK BIN anywhere. If somebody can help me out with this I would very much appreciate it. I don't know if any of this information will help so I posted it.

ALDL Info about my L98 and ECU 1227165
EEPROM Chip = AANK


Application:
A028


1986-89 5.7 V8 PFI '8' L98
DATA STREAM A28 TPI 5.7L MFI (L98) (VIN=8) 85, 86, 87, 88




My BCC
Prog ID BCC Size Year Release Date Eprom ECM Prom ID Scan ID Platform Engine Disp. Trans Trans Type Gear Ratio
32 AANK 16.00 KB 1986 31621 1228107 1227165 1732 2231 YB L98 5.7 MD8 AUTO GM1



Thank you for your help.
Rich Williams

[1project2many]

Hi Rich,

Unfortunately I don't have a copy of that calibration. Is there a reason you're looking for that exact calibration?

It looks like a very early release and it's likely GM released updates.

[Rich_Williams]

Hi 1project2many, I'm looking for one mainly because that's what's in my 86 C4's 1227165 ECU now. So, I just thought I'd stick with it so I can get all my files together for TunerPro RT. Right now I'm researching the hardware and upgrades my ECU is going to need so I can change parameters and settings, in real time, once I get my ECU setup for real time tuning. Do you have any suggestions or recommendations? I am very new to the tuning aspect of my ECU's PROM and any advise I can get will be very much appreciated. Thank you for the reply 1project2many.
Sincerely, Rich Williams
Astor, Florida 32102 USA!

[1project2many]

Hi Rich,

It's usually best to start with the latest calibration for your vehicle. This tool will suggest a calibration based on your VIN number. https://tis2web.service.opel.com/tis2web/

You may have to go through a few steps to get to the latest information.

[Rich_Williams]

1project2many, Thank you for this information. I appreciate it very much.

Sincerely, Rich Williams
Astor, Florida 32102 USA!