Hello again, everyone! My buddy just picked up a running '93 Camaro EDIT: 1994 with the 3.4L and T5 trans. We're going to stuff it into his '76 MG Midget. The '93 seems to be a strange year as far as programming goes. I found a USB to TTL level com cable. What I have figured out so far is that it looks like I can wire up the TXD/RXD lines to pin M, and the ground line to ground on the diag port. This MIGHT give me a connection to the ECU/ECM. I was also considering getting a eeprom reader/writer and doing the chip directly.
Anyone have any pointers or traps for new gamers to avoid?
Pic of my '78 drag car for attention:
![]()
Bookmarks