Hey everyone, newbie here to all of this, even forums so pardon my ignorance if I don't go about this the right way.
I have a 2001 Silverado that I 5.3 swapped from 4.3 last year.
The engine has developed a knock 14k miles later and so I picked up a spare block, had it cleaned and machined .030 over, replaced whole rotating assembly with the exception of the crank and cam with forged and hardened components, deleted egr, and would like to also take the opportunity to switch from dbw to dbc and e fan swap at the same time. I'm currently on the non optimal OS from the bin I pulled from the truck lastnight so would like to get a bin I believe with the following parameters. You guys let me know if I'm missing any information.
2156 OS
5.3 LM7
4l60e
DBC
Egr codes off
E fans on
Vats delete
Vin match
Final ratio changed to 3.73
Also if possible any added performance on stock configuration would be great. Will be doing a sheet metal intake and 102mm with this swap.20241024_145954.jpg
20241015_153326.jpg
Reply With Quote
Bookmarks