Hello Everyone.

[Turbochevytruck]

Hello everyone, I'm a new guy here but not new to tuning. I enjoy performance builds on both diesels and gas engines. Also, tuning on semi trucks, and engine overhauls on semi trucks. I currently have a few current projects of my own going on at the moment. First, is a 1967 Chevelle twin turbo BBC Street/Strip car. Second, is a 2006 Silverado Turbocharged 5.3 with stock ECM and 2 bar COS. Third, is a 1972 VW Super Beetle. Fourth, is a 1960 Impala 4dr. I am excited to be a part of this forum to share my knowledge and learn for others as well.

[n3spitzkopf]

Hey! Sounds like you have some cool projects going on. I read you have a turbo 5.3 running a stock ECM. Sounds like you have already used the OBDX PRO hardware to get you running. Or did you do that with HP tuners and now you are looking to do it for free?

[Turbochevytruck]

I used Hptuners to upgrade to the 2 bar os. That was before I found out the OBDX Pro. Is upgrading to a 3 bar possible with tunerpro?

[dave w]

I used Hptuners to upgrade to the 2 bar os. That was before I found out the OBDX Pro. Is upgrading to a 3 bar possible with tunerpro?

This YouTube Video has details for using a 3 bar MAP with TunerPro. https://www.youtube.com/watch?v=x6Pa52m5KTA

Version 5.2 is even better!

[Turbochevytruck]

Thank you Dave w. Going watch it now.

[dave w]

Thank you Dave w. Going watch it now.

Link with additional TunerPro with turbo information. https://www.patreon.com/home