help with 0411 12202088 cant erase calibration. [Archive]

Goldstandardmachine

07-23-2024, 03:34 AM

Hi everyone!
Im new to the forum but have used a lot of the great info on here for years as a guest, but finally signed up. Ive been in the auto industry for 231 years and been restoring classics for 16 years professionally. Over the last few years ive been taking on doing my own vats delete and emissions codes removal but have yet to run into any issues till today.
I hate to ask right out of the gate but it is what it is.
heres what i have goin on. 2001 silverado 5.3 4l60e 2wd. (im pretty sure the year but i may be wrong.) 12202088 os. the truck was early dbw and we ditched that and went with dbc. its totally stock and in a 1970 c10 longbed (original paint is Perfect!) so i needed to remove the dbw and go dbc so i did all the neccessary calibration changes and now, when using pcmhammer, i cannot get it to erase the old calibration and load the new. Below is the debug data just after the kernel loaded. Any help would be greatly appreciated. Thanks! We Are 138!

[05:13:41:396] Found response, Success[05:13:41:396] Kernel upload 100% complete.
[05:13:41:404] TX: STPX H:6C10F0, R:1, D:3D00
[05:13:41:428] RX: 6D F0 10 76 00
[05:13:41:554] TX: STPX H:6C10F0, R:1, D:3D00
[05:13:42:670] Timeout during receive.
[05:13:42:780] TX: STPX H:6C10F0, R:1, D:3D00
[05:13:42:812] RX: 6C F0 10 7D 00 01 03 05 01
[05:13:42:812] Kernel Version: 01030501
[05:13:42:827] Kernel uploaded to PCM succesfully.
[05:13:42:843] Sending 'test device present' notification.
[05:13:42:843] Setting timeout for Minimum, 0 ms.
[05:13:42:843] TX: STPTO 0
[05:13:42:843] OK
[05:13:42:843] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:42:859] Empty response to STPX with data. OK.
[05:13:42:859] Setting timeout for SendKernel, 50 ms.
[05:13:42:859] TX: STPTO 50
[05:13:42:874] OK
[05:13:42:881] Setting timeout for ReadProperty, 25 ms.
[05:13:42:883] TX: STPTO 25
[05:13:42:891] OK
[05:13:42:891] TX: STPX H:6C10F0, R:1, D:3D03
[05:13:42:926] RX: 6C F0 10 7D 03 00 BA 30 68
[05:13:42:926] Trying P01 512Kb
[05:13:42:926] PCM and image file are both operating system 12202088
[05:13:42:938] Sending 'test device present' notification.
[05:13:42:938] Setting timeout for Minimum, 0 ms.
[05:13:42:938] TX: STPTO 0
[05:13:42:938] OK
[05:13:42:938] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:42:954] Empty response to STPX with data. OK.
[05:13:42:954] Setting timeout for ReadProperty, 25 ms.
[05:13:42:954] TX: STPTO 25
[05:13:42:970] OK
[05:13:42:970] Sending 'test device present' notification.
[05:13:42:970] Setting timeout for Minimum, 0 ms.
[05:13:42:970] TX: STPTO 0
[05:13:42:987] OK
[05:13:42:987] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:43:009] Empty response to STPX with data. OK.
[05:13:43:009] Setting timeout for ReadProperty, 25 ms.
[05:13:43:009] TX: STPTO 25
[05:13:43:017] OK
[05:13:43:017] TX: STPX H:6C10F0, R:1, D:3D01
[05:13:43:058] RX: 6C F0 10 7D 01 00 89 44 71
[05:13:43:059] Flash chip: Intel 28F400B, 512kb
[05:13:43:065] Sending 'test device present' notification.
[05:13:43:065] Setting timeout for Minimum, 0 ms.
[05:13:43:065] TX: STPTO 0
[05:13:43:080] OK
[05:13:43:080] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:43:096] Empty response to STPX with data. OK.
[05:13:43:096] Setting timeout for ReadProperty, 25 ms.
[05:13:43:096] TX: STPTO 25
[05:13:43:112] OK
[05:13:43:122] Calculating CRCs from file.
[05:13:43:129] Initializing CRC algorithm on PCM, this will take a minute...
[05:13:43:133] Sending 'test device present' notification.
[05:13:43:133] Setting timeout for Minimum, 0 ms.
[05:13:43:133] TX: STPTO 0
[05:13:43:143] OK
[05:13:43:143] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:43:159] Empty response to STPX with data. OK.
[05:13:43:159] Setting timeout for ReadProperty, 25 ms.
[05:13:43:159] TX: STPTO 25
[05:13:43:175] OK
[05:13:43:175] TX: STPX H:6C10F0, R:1, D:3D02000000000000
[05:13:44:259] Timeout during receive.
[05:13:44:259] Sending 'test device present' notification.
[05:13:44:259] Setting timeout for Minimum, 0 ms.
[05:13:44:259] TX: STPTO 0
[05:13:44:259] OK
[05:13:44:259] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:44:274] Empty response to STPX with data. OK.
[05:13:44:290] Setting timeout for ReadProperty, 25 ms.
[05:13:44:290] TX: STPTO 25
[05:13:44:306] OK
[05:13:45:344] Timeout during receive.
[05:13:45:344] Sending 'test device present' notification.
[05:13:45:344] Setting timeout for Minimum, 0 ms.
[05:13:45:344] TX: STPTO 0
[05:13:45:360] OK
[05:13:45:360] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:45:375] Empty response to STPX with data. OK.
[05:13:45:375] Setting timeout for ReadProperty, 25 ms.
[05:13:45:375] TX: STPTO 25
[05:13:45:391] OK
[05:13:46:417] Timeout during receive.
[05:13:46:417] Sending 'test device present' notification.
[05:13:46:420] Setting timeout for Minimum, 0 ms.
[05:13:46:420] TX: STPTO 0
[05:13:46:433] OK
[05:13:46:433] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:46:449] Empty response to STPX with data. OK.
[05:13:46:449] Setting timeout for ReadProperty, 25 ms.
[05:13:46:449] TX: STPTO 25
[05:13:46:465] OK
[05:13:47:504] Timeout during receive.
[05:13:47:504] Sending 'test device present' notification.
[05:13:47:504] Setting timeout for Minimum, 0 ms.
[05:13:47:504] TX: STPTO 0
[05:13:47:522] OK
[05:13:47:522] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:47:535] Empty response to STPX with data. OK.
[05:13:47:539] Setting timeout for ReadProperty, 25 ms.
[05:13:47:539] TX: STPTO 25
[05:13:47:551] OK
[05:13:48:589] Timeout during receive.
[05:13:48:589] Receive timed out. Attempt #5, Timeout #5.
[05:13:48:589] TX: STPX H:6C10F0, R:1, D:3D02000000000000
[05:13:49:675] Timeout during receive.
[05:13:49:675] Sending 'test device present' notification.
[05:13:49:675] Setting timeout for Minimum, 0 ms.
[05:13:49:675] TX: STPTO 0
[05:13:49:675] OK
[05:13:49:675] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:49:690] Empty response to STPX with data. OK.
[05:13:49:690] Setting timeout for ReadProperty, 25 ms.
[05:13:49:690] TX: STPTO 25
[05:13:49:707] OK
[05:13:50:744] Timeout during receive.
[05:13:50:744] Sending 'test device present' notification.
[05:13:50:744] Setting timeout for Minimum, 0 ms.
[05:13:50:744] TX: STPTO 0
[05:13:50:744] OK
[05:13:50:744] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:50:760] Empty response to STPX with data. OK.
[05:13:50:760] Setting timeout for ReadProperty, 25 ms.
[05:13:50:760] TX: STPTO 25
[05:13:50:776] OK
[05:13:51:812] Timeout during receive.
[05:13:51:812] Sending 'test device present' notification.
[05:13:51:812] Setting timeout for Minimum, 0 ms.
[05:13:51:816] TX: STPTO 0
[05:13:51:828] OK
[05:13:51:830] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:51:844] Empty response to STPX with data. OK.
[05:13:51:844] Setting timeout for ReadProperty, 25 ms.
[05:13:51:844] TX: STPTO 25
[05:13:51:860] OK
[05:13:52:900] Timeout during receive.
[05:13:52:900] Sending 'test device present' notification.
[05:13:52:900] Setting timeout for Minimum, 0 ms.
[05:13:52:900] TX: STPTO 0
[05:13:52:916] OK
[05:13:52:916] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:52:932] Empty response to STPX with data. OK.
[05:13:52:932] Setting timeout for ReadProperty, 25 ms.
[05:13:52:932] TX: STPTO 25
[05:13:52:948] OK
[05:13:53:985] Timeout during receive.
[05:13:53:985] Receive timed out. Attempt #5, Timeout #5.
[05:13:53:985] Requesting CRCs from PCM.
[05:13:53:992] Setting timeout for ReadCrc, 100 ms.
[05:13:53:992] TX: STPTO 100
[05:13:54:001] OK
[05:13:54:001] Range File CRC PCM CRC Verdict Purpose
[05:13:54:001] 060000-07FFFF not needed not needed n/a OperatingSystem
[05:13:54:016] 040000-05FFFF not needed not needed n/a OperatingSystem
[05:13:54:032] 020000-03FFFF not needed not needed n/a OperatingSystem
[05:13:54:041] Sending 'test device present' notification.
[05:13:54:041] Setting timeout for Minimum, 0 ms.
[05:13:54:041] TX: STPTO 0
[05:13:54:048] OK
[05:13:54:048] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:54:064] Empty response to STPX with data. OK.
[05:13:54:064] Setting timeout for ReadCrc, 100 ms.
[05:13:54:064] TX: STPTO 100
[05:13:54:079] OK
[05:13:54:079] Sending 'test device present' notification.
[05:13:54:079] Setting timeout for Minimum, 0 ms.
[05:13:54:079] TX: STPTO 0
[05:13:54:095] OK
[05:13:54:095] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:54:111] Empty response to STPX with data. OK.
[05:13:54:111] Setting timeout for ReadCrc, 100 ms.
[05:13:54:111] TX: STPTO 100
[05:13:54:126] OK
[05:13:54:126] TX: STPX H:6C10F0, R:1, D:3D02018000008000
[05:13:54:157] RX: 6C F0 10 7D FF 01
[05:13:54:221] Sending 'test device present' notification.
[05:13:54:221] Setting timeout for Minimum, 0 ms.
[05:13:54:221] TX: STPTO 0
[05:13:54:221] OK
[05:13:54:221] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:54:242] Empty response to STPX with data. OK.
[05:13:54:242] Setting timeout for ReadCrc, 100 ms.
[05:13:54:242] TX: STPTO 100
[05:13:54:252] OK
[05:13:54:252] TX: STPX H:6C10F0, R:1, D:3D02018000008000
[05:13:54:363] RX: 6C F0 10 7D FF 02
[05:13:54:443] Sending 'test device present' notification.
[05:13:54:443] Setting timeout for Minimum, 0 ms.
[05:13:54:443] TX: STPTO 0
[05:13:54:443] OK
[05:13:54:454] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:54:458] Empty response to STPX with data. OK.
[05:13:54:458] Setting timeout for ReadCrc, 100 ms.
[05:13:54:458] TX: STPTO 100
[05:13:54:474] OK
[05:13:54:474] TX: STPX H:6C10F0, R:1, D:3D02018000008000
[05:13:54:599] RX: 6C F0 10 7D FF 02
[05:13:54:662] Sending 'test device present' notification.
[05:13:54:664] Setting timeout for Minimum, 0 ms.
[05:13:54:665] TX: STPTO 0
[05:13:54:678] OK
[05:13:54:679] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:54:694] Empty response to STPX with data. OK.
[05:13:54:695] Setting timeout for ReadCrc, 100 ms.
[05:13:54:695] TX: STPTO 100
[05:13:54:710] OK
[05:13:54:711] TX: STPX H:6C10F0, R:1, D:3D02018000008000
[05:13:54:822] RX: 6C F0 10 7D FF 02
[05:13:54:884] Sending 'test device present' notification.
[05:13:54:884] Setting timeout for Minimum, 0 ms.
[05:13:54:884] TX: STPTO 0
[05:13:54:899] OK
[05:13:54:899] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:54:915] Empty response to STPX with data. OK.
[05:13:54:915] Setting timeout for ReadCrc, 100 ms.
[05:13:54:915] TX: STPTO 100
[05:13:54:931] OK
[05:13:54:935] TX: STPX H:6C10F0, R:1, D:3D02018000008000
[05:13:55:044] RX: 6C F0 10 7D FF 02
[05:13:55:105] Sending 'test device present' notification.
[05:13:55:105] Setting timeout for Minimum, 0 ms.
[05:13:55:105] TX: STPTO 0
[05:13:55:105] OK
[05:13:55:105] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:55:120] Empty response to STPX with data. OK.
[05:13:55:120] Setting timeout for ReadCrc, 100 ms.
[05:13:55:120] TX: STPTO 100
[05:13:55:136] OK
[05:13:55:136] TX: STPX H:6C10F0, R:1, D:3D02018000008000
[05:13:55:246] RX: 6C F0 10 7D FF 02
[05:13:55:309] Sending 'test device present' notification.
[05:13:55:309] Setting timeout for Minimum, 0 ms.
[05:13:55:309] TX: STPTO 0
[05:13:55:309] OK
[05:13:55:309] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:55:325] Empty response to STPX with data. OK.
[05:13:55:325] Setting timeout for ReadCrc, 100 ms.
[05:13:55:325] TX: STPTO 100
[05:13:55:344] OK
[05:13:55:344] TX: STPX H:6C10F0, R:1, D:3D02018000008000
[05:13:55:452] RX: 6C F0 10 7D FF 02
[05:13:55:514] Sending 'test device present' notification.
[05:13:55:514] Setting timeout for Minimum, 0 ms.
[05:13:55:516] TX: STPTO 0
[05:13:55:516] OK
[05:13:55:516] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:55:530] Empty response to STPX with data. OK.
[05:13:55:530] Setting timeout for ReadCrc, 100 ms.
[05:13:55:530] TX: STPTO 100
[05:13:55:546] OK
[05:13:55:546] TX: STPX H:6C10F0, R:1, D:3D02018000008000
[05:13:55:656] RX: 6C F0 10 7D FF 02
[05:13:55:735] Sending 'test device present' notification.
[05:13:55:735] Setting timeout for Minimum, 0 ms.
[05:13:55:735] TX: STPTO 0
[05:13:55:745] OK
[05:13:55:751] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:55:753] Empty response to STPX with data. OK.
[05:13:55:767] Setting timeout for ReadCrc, 100 ms.
[05:13:55:767] TX: STPTO 100
[05:13:55:783] OK
[05:13:55:783] TX: STPX H:6C10F0, R:1, D:3D02018000008000
[05:13:55:895] RX: 6C F0 10 7D FF 02
[05:13:55:956] Sending 'test device present' notification.
[05:13:55:956] Setting timeout for Minimum, 0 ms.
[05:13:55:956] TX: STPTO 0
[05:13:55:973] OK
[05:13:55:973] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:55:988] Empty response to STPX with data. OK.
[05:13:55:988] Setting timeout for ReadCrc, 100 ms.
[05:13:55:988] TX: STPTO 100
[05:13:56:003] OK
[05:13:56:007] TX: STPX H:6C10F0, R:1, D:3D02018000008000
[05:13:56:114] RX: 6C F0 10 7D FF 02
[05:13:56:179] Sending 'test device present' notification.
[05:13:56:180] Setting timeout for Minimum, 0 ms.
[05:13:56:180] TX: STPTO 0
[05:13:56:193] OK
[05:13:56:193] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:56:209] Empty response to STPX with data. OK.
[05:13:56:209] Setting timeout for ReadCrc, 100 ms.
[05:13:56:209] TX: STPTO 100
[05:13:56:224] OK
[05:13:56:224] TX: STPX H:6C10F0, R:1, D:3D02018000008000
[05:13:56:335] RX: 6C F0 10 7D FF 02
[05:13:56:399] Sending 'test device present' notification.
[05:13:56:399] Setting timeout for Minimum, 0 ms.
[05:13:56:399] TX: STPTO 0
[05:13:56:399] OK
[05:13:56:407] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:56:414] Empty response to STPX with data. OK.
[05:13:56:414] Setting timeout for ReadCrc, 100 ms.
[05:13:56:414] TX: STPTO 100
[05:13:56:431] OK
[05:13:56:431] TX: STPX H:6C10F0, R:1, D:3D02018000008000
[05:13:56:547] RX: 6C F0 10 7D FF 02
[05:13:56:620] Sending 'test device present' notification.
[05:13:56:620] Setting timeout for Minimum, 0 ms.
[05:13:56:620] TX: STPTO 0
[05:13:56:620] OK
[05:13:56:620] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:56:635] Empty response to STPX with data. OK.
[05:13:56:648] Setting timeout for ReadCrc, 100 ms.
[05:13:56:648] TX: STPTO 100
[05:13:56:652] OK
[05:13:56:652] TX: STPX H:6C10F0, R:1, D:3D02018000008000
[05:13:57:884] Timeout during receive.
[05:13:57:946] Sending 'test device present' notification.
[05:13:57:948] Setting timeout for Minimum, 0 ms.
[05:13:57:948] TX: STPTO 0
[05:13:57:952] OK
[05:13:57:952] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:57:962] Empty response to STPX with data. OK.
[05:13:57:962] Setting timeout for ReadCrc, 100 ms.
[05:13:57:962] TX: STPTO 100
[05:13:57:979] OK
[05:13:57:979] TX: STPX H:6C10F0, R:1, D:3D02018000008000
[05:13:58:073] RX: 6C F0 10 7D 02 01 80 00 00 80 00 FF 9C BB D0
[05:13:58:073] 008000-01FFFF 954CC1D5 FF9CBBD0 Different Calibration
[05:13:58:088] 006000-007FFF not needed not needed n/a Parameter
[05:13:58:104] 004000-005FFF not needed not needed n/a Parameter
[05:13:58:104] 000000-003FFF not needed not needed n/a Boot
[05:13:58:120] Sending 'test device present' notification.
[05:13:58:135] Setting timeout for Minimum, 0 ms.
[05:13:58:135] TX: STPTO 0
[05:13:58:151] OK
[05:13:58:152] TX: STPX H:8CFEF0, R:0, D:3F
[05:13:58:167] Empty response to STPX with data. OK.
[05:13:58:167] Setting timeout for ReadCrc, 100 ms.
[05:13:58:167] TX: STPTO 100
[05:13:58:183] OK
[05:13:58:183] Processing range 008000-01FFFF
[05:13:58:183] Erasing.
[05:13:58:198] Setting timeout for EraseMemoryBlock, 7000 ms.
[05:13:58:198] TX: STPTO 7000
[05:13:58:214] OK
[05:13:58:214] TX: STPX H:6C10F0, R:1, D:3D05008000
[05:14:13:244] Timeout during receive.
[05:14:13:244] Sending 'test device present' notification.
[05:14:13:244] Setting timeout for Minimum, 0 ms.
[05:14:13:244] TX: STPTO 0
[05:14:13:259] OK
[05:14:13:259] TX: STPX H:8CFEF0, R:0, D:3F
[05:14:13:275] Empty response to STPX with data. OK.
[05:14:13:275] Setting timeout for EraseMemoryBlock, 7000 ms.
[05:14:13:275] TX: STPTO 7000
[05:14:13:291] OK
[05:14:21:302] Timeout during receive.
[05:14:21:302] Sending 'test device present' notification.
[05:14:21:302] Setting timeout for Minimum, 0 ms.
[05:14:21:302] TX: STPTO 0
[05:14:21:302] OK
[05:14:21:302] TX: STPX H:8CFEF0, R:0, D:3F
[05:14:21:320] Empty response to STPX with data. OK.
[05:14:21:320] Setting timeout for EraseMemoryBlock, 7000 ms.
[05:14:21:320] TX: STPTO 7000
[05:14:21:334] OK
[05:14:29:347] Timeout during receive.
[05:14:29:347] Receive timed out. Attempt #3, Timeout #3.
[05:14:29:347] TX: STPX H:6C10F0, R:1, D:3D05008000
[05:14:29:379] RX: 6C F0 10 7F 3D 05 00 80 00 11
[05:14:29:379] Received an unexpected response. Attempt #1, status Refused.
[05:14:37:391] Timeout during receive.
[05:14:37:392] Sending 'test device present' notification.
[05:14:37:392] Setting timeout for Minimum, 0 ms.
[05:14:37:392] TX: STPTO 0
[05:14:37:392] OK
[05:14:37:392] TX: STPX H:8CFEF0, R:0, D:3F
[05:14:37:407] Empty response to STPX with data. OK.
[05:14:37:407] Setting timeout for EraseMemoryBlock, 7000 ms.
[05:14:37:407] TX: STPTO 7000
[05:14:37:423] OK
[05:14:45:445] Timeout during receive.
[05:14:45:445] Sending 'test device present' notification.
[05:14:45:445] Setting timeout for Minimum, 0 ms.
[05:14:45:445] TX: STPTO 0
[05:14:45:461] OK
[05:14:45:461] TX: STPX H:8CFEF0, R:0, D:3F
[05:14:45:477] Empty response to STPX with data. OK.
[05:14:45:477] Setting timeout for EraseMemoryBlock, 7000 ms.
[05:14:45:486] TX: STPTO 7000
[05:14:45:493] OK
[05:14:53:497] Timeout during receive.
[05:14:53:497] Receive timed out. Attempt #4, Timeout #3.
[05:14:53:497] Unable to erase flash memory: Error
[05:14:53:504] Select the debug tab, click anywhere in the text,
[05:14:53:530] press Ctrl+A to select the text, and Ctrl+C to
[05:14:53:530] copy the text. Press Ctrl+V to paste that content
[05:14:53:545] content into your forum post.
[05:14:53:545] Elapsed time 00:01:21.0826172

Goldstandardmachine

07-23-2024, 07:34 AM