No, I don't have a knock sensor, just something I saw as I was looking at all the different tables. I'm looking forward to seeing how it does. I'm...

Are you using a knock sensor? If so I can move the knock tables over.

Has anyone heard from Carl / InTech lately? It looks like he stopped posting on forums about a year ago.

I have always loved the look of a Mark V valve cover with wide, polished ribs. I know there are ribbed aluminum valve covers for smallblocks...

Riddle me this! The only way I can get my truck to run decent is to zero out the spark biases. My initial timing is 0, I'm running at 28deg at idle...

I discovered this yesterday. I adjusted my curb idle screw to obtain around 25 counts on the IAC and it ran the TPS up to .68V, the FSM calls for...

https://www.youtube.com/watch?v=r4e7zPAdMbM

Removed the ICM, and measured resistance between P and N per diagram should be around 10K, but it's open. Is that test proper? Bad ICM?

Yes, under the rotor.

is the module inside the dist under the rotor? there is 12V on the pink pins on the injector connectors with key on, when in crank, voltage drops...

No distributor reference pulse (DRP) will cause a no start. The DRP comes from the distributor ignition module.

Yeah, I just used the following for it to run way better than it was running. The no vats one is the one i modified to account for DTCs and no cats....

The LQ9 never came with a 4L80E behind it. Will need to segment swap to create a tune for that pairing.

Maybe: https://www.gearhead-efi.com/Fuel-Injection/showthread.php?1515-2004-TunerPro-Bin-Files

Thank you all for all your help! Yeah, with the amount of issues this project had, Im quick to jump to conclusions. Well, I think the injectors were...

I have parts to ship. Please send a PM with your address if you are still interested.

I have been looking through the files and there are a lot of differences between what you have done and what the 260z9011 file has. One thing I...

Quick update, My new laptops file explorer was the cause for not being able to download the .ADS/.ADX file. The thing I forgot to do was, in file...

Test, do not replace without confirming. I have had multiple bad parts, even from dealership.

And another update. Throttle position sensor code came back again. It cant be that a 2nd sensor I installed is also bad. Guess this harness is bad.

Its a motor swap. Im using an aftermarket harness. Thats a good point, Ill check where they feed from

Regarding the injector codes, is this a stock application or a motor swap? I ask this because I've seen a lot of people tried to drive all of the...

Alright, I think I found my problem. After 2 drive cycles, a p0200 code popped up. Ill try figuring out which injector is at fault and try fixing it,...