The Silverado will have an 85mm MAF, dual cats and dual post cat 02s. Not that all of that will matter in a conversion. The S10 uses the smaller...

ZEDRATED, the same ZEDRATED that had the widebody S30? ZR8ED? If so, funny to see you here too. lol If you need some hands on help, let me...

Can't be for certain with $8D 7730 7727 as I reached for the first memcal I could find. Popped the blue cover off turns out this $0D under the knock...

True 256k for $8D but $32B is half of that so not the lower half but the lower quarter.

Here is a 02 Silverado 4.3L M5 bin. Shouldn't be too much different than a S10 except tire size and maybe rear gear ratio.

The factory memcal has two main components. The prom and the ESC resistor board.

I recently had a 'died, no restart, no CEL ( PCM SES) ' turned out to be a corroded crimp in the engine harness to the fenderwell, the crimp hadnt...

sorry for the lame question ... but am i referring it by 'limp home module' but its really called the ESC resistor board?

Ok. Though I suppose the possibility exists that the ESC resistor board is bad in the memcal. I guess after you fix that interference and the...

I am running a modified AUJP prom with a Moates G1 adapter This is on the limp home module: 2R0130

Wait... are you running a 3.8 memcal? The ESC resistor board is different I believe than a 5.7 one. That might explain your crazy knock retard...

I never would have guessed that might be the issue. I will definitely try it and let you know what happens. -Thanks

Ok, so you're running a 512k chip. Yeah, you have to ensure the data gets to the right part of the chip since the factory chips are 256k. I had...

Ok, here it is. You need to run the attached adx file since the VE Tool is uses the histogram data format in that adx file. The VE tool is...

awesome looking forward to it!

I uploaded 2 BIN files, modified and NOT modified. -Thanks

Agreed... you can do the injector flow rate to get the car driveable. Then drive it around and log the BLM's at other parts of the RPM and MAP...

Definitely MAYBE...I have the 95 S10 GM Factory service manual set which covers 2.2. What year, what info?

Cool, someone recognizes that gear! Gold plated boards, connectors, pins... Strange thing is it works BETTER than new with nearly 400 tantalum...

Injector flow is a coarse tune knob. If all the Closed Loop BLM's (with ESC connected) are Rich (below 118) INCREASE the injector flow rate from...

:welcome: The wall of test equipment brings flash-backs to my days as a USN Radar Technician. Challenges to replacements for the 95 OBD1 PCM. . ....

Post your stock bin file and the modified bin file.

So as a novice, reading those stickies, for me anyway forced me to carefully construct the airflow from aircleaner to exhaust tip and the sensors...

Thanks, I will look at the files. First, I have to figure out first why the modifications I make to the BIN file do not make changes to the...

I am using: The BIN file from my car and a $32B XDF file. A Moates Burner 2 GP1 Package: GM Adapter with 2 chips from Moates My cars MemCal...