Hi Tom. I'm sorry the site is giving you trouble. I'm not sure what folks are seeing that allows them to try and send attachments. There's nothing...

Ok thank you

Forgive the incessant posting. I saw this post by Robert:...

Files should be in your inbox about now. I *think* this is the same one I sent to you before. Go Daddy looked at the file and decided I was up to no...

Ok thank you very much do you need my email address again

Hi, I tried to send someone a binary file but Go Daddy objected. I renamed the file to .txt and still objections. How to attach files? This is...

You have some luck here... I wrote a program to do that way back & was able to find it. Here ya go: ---> No Go Daddy won't let me...I will send by...

Maybe 16268377? I can't find the maps to make or create data, madpack, or definitions. Maybe a scan tool:...

HOLA, gracias por responder. Usa una computadora que me tiene desesperada jajaja, porque al ser un motor pequeño nadie se ha dedicado a hacer...

Alright. I've downloaded a few different bin files. None seem to be for the 16196397 pcm. The revision 3 bins originally posted by RobertISaar have...

The linked thread has a 5.3 with Manual flash, but it's "DRIVE BY CABLE" ...

Would it be possible for you to send the file already divided

It's a binary file, first byte in the file is programmed to location 0 for TSide. Byte 65536 (or $10000) is the start of bank 1, programmed at $10000...

Ok so how do you divide the file that’s where I’m confused how do you tell where the first 128k it

The first 64K ($10000) in the file is bank 0 of the TSide. The second 64K is bank 1 TSide. If you take the first 128K from the file and transfer them...

Checked the VIN. It's a '94. Explains the later PCM number. Started playing with stuff, including FlashHack.

I have the obd2 bin how do you split it? What is the second chip for programming info

thank you dave w. do you have a suggestion on one? should i get a manual trans either 4.8 or 6.0 and change the displacement?

Sweet. I’ll definitely check Flash Hack.

I think the computer part number supersedes the make / model / year. From the Flash Hack website: V6 P66 1993-1995 3100 and 3.4L engines. ...

I emailed TunerCat and he specifically said ‘93 is unsupported. Which PCM number, or either, should I use? I’ve loaded up a bin from the second...

I’m thinking it’s NOT going to be an issue whether it’s 1993 or 1994 model F-Body. The computer is supported by TunerCats, TunerPro, and Flash Hack. ...

To add some weirdness, there's two part numbers on the ECU. I've attached the picture. And I've found a few different bin files for the second...

:welcome: What EFI computer does the x16szr use? The Opel Opel X16SZR is a 1.6 l (1,598 cc, 97.52 cu-in) straight-four four-stroke natural...

:welcome: Gearhead-efi link for 2002 .bin files: https://www.gearhead-efi.com/Fuel-Injection/showthread.php?1513-2002-TunerPro-Bin-Files

:welcome: I like the plan for using the 16197427 PCM. The ‘0411 would likely require adding a crank position sensor and cam position sensor to...

Thank you very much, I have a bunch of chips, do you think someone here could get the xdf out of it if I sent them one of the chips I have?

Ordered a TTL level serial cable and bought a copy of TunerPro RT. Since I'll be using it with both cars, might as well throw the dude some money for...

Luckily for me I only have the one MCU to deal with. ; FFC0 $0000 FFC2 $0000 FFC4 $0000 FFC6 $0000 FFC8 $0000 FFCA $0000 ...