Thanks for the reply, I don't have a burner and AFI is fairly protective of their stuff, but I will reach out to them and see if that is posable. If...

I think the checksum patch needs to installed, .zip attached

could you explain checksum's to me please. when i try to save it says one or more checksums couldnt be updated. check checksum addressing, ect, for...

I use EFI Live to data log with, then export the data log to an Excel spreadsheet to analyze. The examples are from a L31 tune, the LM7 tuning is...

There is another group of eight word locations addressed at $1580 thru $158E. These eight locations are read and clear only. What I mean by that is...

:welcome: Gearhead-efi link for 6.0 tuning information: https://www.gearhead-efi.com/Fuel-Injection/forumdisplay.php?32-OBDII-Tuning

For someone with an eprom burner it's generally not difficult to read a copy of the binary out of an existing chip. Just out of curiousity, have...

Getting back to my work to understand this PCM now that the majority of the reprogramming stuff is out of the way... I have not yet found a way...

I’d like to take you up on this, just haven’t had time to log anything. Any suggestions on which parameters to use for the most useful data log?

Hi, It's no big trouble, I just sent him the files with email. The thread...

Hi Tom. I'm sorry the site is giving you trouble. I'm not sure what folks are seeing that allows them to try and send attachments. There's nothing...

Ok thank you

Forgive the incessant posting. I saw this post by Robert:...

Files should be in your inbox about now. I *think* this is the same one I sent to you before. Go Daddy looked at the file and decided I was up to no...

Ok thank you very much do you need my email address again

Hi, I tried to send someone a binary file but Go Daddy objected. I renamed the file to .txt and still objections. How to attach files? This is...

You have some luck here... I wrote a program to do that way back & was able to find it. Here ya go: ---> No Go Daddy won't let me...I will send by...

Maybe 16268377? I can't find the maps to make or create data, madpack, or definitions. Maybe a scan tool:...

HOLA, gracias por responder. Usa una computadora que me tiene desesperada jajaja, porque al ser un motor pequeño nadie se ha dedicado a hacer...

Alright. I've downloaded a few different bin files. None seem to be for the 16196397 pcm. The revision 3 bins originally posted by RobertISaar have...

The linked thread has a 5.3 with Manual flash, but it's "DRIVE BY CABLE" ...

Would it be possible for you to send the file already divided

It's a binary file, first byte in the file is programmed to location 0 for TSide. Byte 65536 (or $10000) is the start of bank 1, programmed at $10000...

Ok so how do you divide the file that’s where I’m confused how do you tell where the first 128k it

The first 64K ($10000) in the file is bank 0 of the TSide. The second 64K is bank 1 TSide. If you take the first 128K from the file and transfer them...

Checked the VIN. It's a '94. Explains the later PCM number. Started playing with stuff, including FlashHack.

I have the obd2 bin how do you split it? What is the second chip for programming info

thank you dave w. do you have a suggestion on one? should i get a manual trans either 4.8 or 6.0 and change the displacement?

Sweet. I’ll definitely check Flash Hack.