Hello, I don't remember ever seeing ratings for those injectors. I'm not aware of a tuning definition to allow one to see the BPW constant,...

Maybe the best approach is to start from scratch? Get a pair of injectors from a known application and enter the correct injector values into the...

I don't understand why AFI didn't have me turn the pressure up on the smaller injector to give it more fuel, my fuel pump and regulator are able to...

It is at 13 psi

Interesting. I am not aware of a correlation between the numbers on the outside of an injector and the part number or application. Saturn 1.9...

I have spent some time looking at motor man fuel injectors and rock auto. It looks like the smaller injector (6751) was used on a 1991 Saturn with a...

Here's a picture of the 2 different size injectors, the smaller injector is 6751 and the larger injector is 5284. The 5284 is in the car now.

I was told to run 13 PSI and the displacement is 2.8 and about 9.5/1 compression. I have the number off the first set of injectors, 6751. I will take...

Based on pictures on Patton's site, the kit comes with Multec Bottom Feed injectors. There are only a few OE applications I'm aware of that use this...

What type of injector is it that I have, I have not been able to find much info on this type of injector. I have seen that Holy uses them in some...

I can't seem to get an xdf file that will read the 1205612 bin properly. Tried creating one with Universal Patcher but i get the same results. These...

1project2many, Thank you for this information. I appreciate it very much. Sincerely, Rich Williams Astor, Florida 32102 USA!

:welcome:

I have the same os 12597120 on a ecm and I cant get it to delete vats, ran into this one a different os as well and had to find the xdf for it. It...

Hey Dave, I’d be interested in purchasing these parts from you. Does the ALDL cable you have allow you to connect to a laptop via a HDMI port or...

:welcome:

https://pcmhacking.net/forums/viewtopic.php?f=42&t=7482 With that patch. There are newer versions as well on his patreon page.

Is there a way to change to VE table to allow for 2 bar or 3 bar for speed density tuning? trying to put together a turbo set up soon

Thank you for the information. Looks like I have some reading to do! I didn't think I would ever dive into this but I'm going to do exactly that. ...

Welcome to the club. I'm in England with a High compression 383 6 speed 95 Z28. Down load EEHack & Flash Hack & read all info on Steveo's website...