Yeah I did that for both the WB AFR gauge and the Lambda gauge. Got those right! I guess when I corrected those two gauges it corrected the history...

I think the WBO2 Equation in the .adx requires an update, see attached.

me x2 it wrote an os that was on a different map (memory map\location) and figured this out through tinytuner

The vehicle is an off road RockCrawler tube chassis, with an 04 LS 5.3 (L59) out of a silverado 1500 with 99-03 (blue/Red pcm) Drive by cable no...

I have a burn 2 and can burn chips. I’m just not sure where to start exactly. These logs where just idling as I have not got out of the driveway yet

I'm seeing blms of 160 that need to be at 128. 160 is usually the set limit meaning if it needed more fuel ecm cannot adjust to a greater number. You...

I am trying to find the instructions for posting and can't seem to find them. if you can point me in the right direction id appreciate it. In...

yes it does appear to be commanding fuel but I'm not sure why. Fuel pressure is around 12 psi, but the BLM is constantly growing at idle speed. I can...

It appears to be running lean.

Appreciate it Dave, will check this out. I have the same chip when I looked at the pictures I took of the computer before I installed it.

Uh, yeah.

Tbh I don’t even own one yet. “I’m not a smart man…” but it’s probably in the ADX “and that’s about all I have to say.”

Damn! Nobody? I just need to access the scalar for the WB AFR and Lambda history tables so I can datalog and get my fuel trims right.

Maybe this schematic will help, it's the charging schematic for a 2002 C1500 It appears the alternator 4 pin connector pinout is shown, not the...

Difference tool ABTU vs. Read 00C000 ~ 00FFFF1988 Corette OEM Data File NOT Modifed

Thanks - I will try the BIN file when I get a chance. Also, I took the Corvette out today. The car ran great. No Code 36 and the fan comes on at...

Do you know when you will have the un-brick kits in stock.

Good morning, I have been working at changing my TPS so it will do the full range of movement. The way it was setup it would only get to about 68% of...

I agree, the 27SF512 Chip is 64K. The 27SF512 .bin files in post #7 have the 1988 Corvette programming in the "bottom"16K of chip. I flashed a...

The Howell TBI system I worked on used the 1227747 computer: ...