Link to gearhead-efi library of 1985 Corvette .bin files: https://www.gearhead-efi.com/Fuel-Injection/showthread.php?364-1226870-ECM-Information-1F

I have 2 injectors coming and they rated at 52 lb/hr. Sounds like these will work.

Well I found a oem injector, they wanted $1999.99 for it, I also found new Standard injectors for $122. I think I will need to go with the Standard...

Thanks, I wish the LS engine and trans was complete when I got it, however it was only a long block, no intake, injectors, TB, MAF, IAT, PCM or...

There are some Standard injectors on Rock auto, but I will look around some first.

I'm happy to help. This should get you on track to making this calibration work really well. Those TBI injectors were originally running at 9 to...

Often starting with a stock engine then adding one performance modification at a time provides good learnings and a successful tune. Mafless...

Thank you. After uninstalling and reinstalling twice, it seems to be working now. I appreciate the help!

I was thinking about it. If my 96 is reading and writing ok. Can I put my y body pcm into my b body and read and rewrite it through the b body and...

That is not what I asked.

I have been looking around and it looks like there are a lot of bottom feed injectors that are for 2.5's. I have 1 that was used on 2.5, 2.2 and 2.0...

ok that would be great i would appreciate it Thank You

Also does anyone know anything about the TCM used in the 93-95 jeep grand Cherokee? These were for a 42re. Reported to be the same electronically as...

Ok. Thanks for reply. How do I run a debug log? And is there a list of uses or just start. Pulling in order? Also how would I tell if it’s a...

That sounds good, what psi does those run at and where should I get them. Is there a good place to purchases them and should I try to get new ones....

There's a parameter in there "Speed pulses per driveshaft revolution" I'm wondering if this is what you want to change. Maybe it's as simple as...

Some debug log will help figure problems, looks like some module don`t stay quiet, Try pulling some fuses. You may have a ground issues too, that...

Hi. Not sure if I attached this correctly. The tires are 255 40r 18 Nitto Invo.

Incase anyone needs to know it took me a while to find this, but here is where the pinout is for the TBI hall effect distributor ...

I know it's been a while, all a year since I started this thread. I have acquired a distributor for a 79 New Yorker with a 318. It has a VR pickup...

Attach your bin file to a post here. Also what is the stock tire size on your Camaro?

The injector size calculator believes a pair of 52 lb/hr injectors will support 220 hp. It looks like the 2.5L/2.2L TBI injector is rated for 56...

The stock 280z had 178 and with the mods on my car it should be about 200, some say with the mods I have it could be as much as 220 but I don't think...

Perhaps these screen captures will help?

Most TBI applications operate within a range of 9-13 psi fuel pressure. GM did alter operating pressure for some applications. The 91-94 Saturn 1.9...