Does anyone know if there is anything that can be changed in a P04 calibration that would stop the TCC from switching off when the throttle is closed? More specifically, I have the tables setup to there the TCC switches on & off at the MPH & TPS that I desire and that works fine. But my driving habits are such that as I'm running along at say 55mph (with the TCC ON), there are occasions when I briefly let off the throttle (for a subtle amount of deceleration) & each time the TCC switches off. It does re-engage when I re-open the throttle but I would prefer to have it that the TCC does not switch off each time I close the throttle (unless the MPH were to decrease enough). I was thinking that perhaps I might be overlooking something obvious that would accomplish this.