Tuning options for Dodge Mopar

[enlight22]

aldl is a gm specific thing afaik. we will have to upload via bdm or by reverse engineering the method to do it over the obd port.

[34blazer]

aldl is a gm specific thing afaik. we will have to upload via bdm or by reverse engineering the method to do it over the obd port.

i always thought OBD II laws stated all vehicles have to have accessible data through the ALDL? ill have to find a pinout to verify

[Six_Shooter]

The Acronym "ALDL" is GM specific, for "Assembly Line Diagnostic Link". This is most commonly used in reference to teh OBD1 Delco ECMs and PCMs.

The OBD2 data port is most commonly refered to as an "OBD port", or "On Board Diagnostic port."

[EagleMark]

i always thought OBD II laws stated all vehicles have to have accessible data through the ALDL? ill have to find a pinout to verify

The OBDII laws and PIDS are all the same for emmissions, this made repairs at shops much easier, but each manufacturer has ther own Enhanced versions as well.

[RobertISaar]

another common term for the port that came around right before OBD2 was implimented was "data link connector" (DLC).

it's all relatively synonymous if you don't look too far into it.

[34blazer]

OK thanks for the heads up, apologies for being ignorant lol. Our comm support is at the squadron with us so Im going to start bugging them to see if i can come up with something. Either way it looks like we are stuck for know. Its going to be awhile before I can learn enough to start helping but Im not giving up on this. Too stubborn...

[EagleMark]

Get a spare PCM and take it apart, desolder chip, read it, solder in a Zip socket with new EEPROM. No OBDII port flashing...

[RobertISaar]

that solves up/downloads.... now to actually make sense of the calibration.... woof.

figuring out what gigantic tables do is prettty easy, but little stuff(scalars/flags), that's the painful stuff to figure out.