Results 1 to 10 of 10

Thread: Bin file needed

  1. #1
    Carb and Points!
    Join Date
    Sep 2019
    Age
    57
    Posts
    5

    Bin file needed

    I have a 1994 4.3 Vortec EGR Blocked off No Smog Equipment installed it has 1 O2 sensor 2 knock sensors 700r4 transmission. I really need a good Bin file for my application.
    Original ECM is 16196395 Code on ECM is BHRJ the motor was originally paired with a 4l60E can anyone help me? I think I just need a Bin that will work with a manual transmission since I replaced my 4l60E with a 700R4 thanks

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    The .bin files from a 16197427 will work with 16196395. Link to 16197427 .bin files, http://www.gearhead-efi.com/Fuel-Inj...Information-0D
    INCLUDING 4.3 .bin files.

    dave w

  3. #3
    Carb and Points!
    Join Date
    Sep 2019
    Age
    57
    Posts
    5
    thanks but I am not sure any of the Bin files there will work they all look like they are for a 4l60e and I have a 700r4 i don't see any for manual trans maybe I am missing it

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    BJFD 94 C-K Truck 4.3TBI 5 speed.BIN

    dave w

  5. #5
    Carb and Points!
    Join Date
    Sep 2019
    Age
    57
    Posts
    5
    My engine is a 4.3CPI

  6. #6
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    You have the option to make a custom chip by swapping parameters from the TBI 5 speed .bin into the CPI .bin file.

    dave w

  7. #7
    Carb and Points!
    Join Date
    Sep 2019
    Age
    57
    Posts
    5
    Thanks for the info I will need to talk with my friend he is the one that is burning the chip for me I know nothing about how to do any of this

  8. #8
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    There are programming parameters in the chip to use either a 4L60E or a 700R4.

    dave w

  9. #9
    Carb and Points!
    Join Date
    Sep 2019
    Age
    57
    Posts
    5
    how do I do that this is my first time trying to program a chip

  10. #10
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    Quote Originally Posted by Dishmael View Post
    how do I do that this is my first time trying to program a chip
    There is a learning curve to programming chips. Using the correct .xdf definition file is necessary. The $OD link http://www.gearhead-efi.com/Fuel-Inj...Information-0D has the Fast 355 $OD 700r4.xdf file with 700R4 parameters.

    dave w

Similar Threads

  1. Bin file for Buick 350 needed for 350 Chevy TBI.
    By magilla in forum GM EFI Systems
    Replies: 5
    Last Post: 09-30-2017, 01:47 AM
  2. NEEDED! A $5b5 ADX file.
    By damanx in forum GM EFI Systems
    Replies: 4
    Last Post: 05-29-2015, 03:41 AM
  3. 2011 6.0 file needed
    By roughneck427 in forum OBDII Tuning
    Replies: 0
    Last Post: 06-10-2014, 06:28 AM
  4. L33 Stock Calibration file needed
    By 96HawkCnvt in forum TunerCat OBDII
    Replies: 4
    Last Post: 06-25-2013, 10:01 PM
  5. 96-97 Vortec Manual .cal or .bin file needed?
    By EagleMark in forum TunerCat OBDII
    Replies: 4
    Last Post: 01-30-2013, 08:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •