AutoProm ADC Interface Channels Set up in TunerPro!

[T2000]

I certainly havent noticed the glitch or error in other logged data... certainly not the usual suspects anyway (RPM,MAP,TPS,SPARK etc)

The XDF and ADX is OSE_12P which if you are interested is documented in detail here: http://delcohacking.net/forums/viewtopic.php?f=27&t=356

I have attached the complete OSE_12P package which has the XDF & ADX.
OSE12P can be run on any '808, '165 or '3082 ECM & supports 2-8 cyl.

I run my own variation of the 1BAR Petrol ADX which gives me different dash's and the WB (I'm at work atm so dont have access to it)


I would be interested to know your theories in the meantime. You question re other errant data at the same point in time... indicative of something which you have seen before?

For the purpose of my previous experiment the APU1 was not connected to the ECM at all! I isolated the APU1 and just fed a known voltage to the ADC.

Thanks for your time gents