I do some test today with the earlier version. All works fine. I tested the speed writing but when I read it it looks like regular version of the bin with no ff added. Is it normal behaviour or It`s my mistake(I am not quite sure what i did, and checked the bins later). I tried to flash the same bin but the write buttons are greyed out and couldn`t force patch only write with identical bins.
Also the last figure of the Vin is missing and can`t be written.
In the mode1 msg 0 there is one more free byte to add. I suggest you load there byte_011E which is the ad channel for pin d31 and that way you can have true dual wideband setup with pin d27. Both pins are configured the same on the board and will output identical ad result.
For the tcc there are different setups in 94 and 95 bins. 94 is only tcc lock, 95 adds tcc dc control.
I will check the commands and post them later.
You need to patch it in the datastream to show up. It is at byte_11eOriginally Posted by jthompson122183
Can you add the aldl data in the modified xdf you are working on. I will really appreciate it.
Bookmarks