Howdy.

The strange codes preceded by a dollar sign such as $E6 and $EE are identifiers. They're called the mask ID or simply the mask. When working with tuning tools one must match the .bin with the editor, datalogger, and the ecm/pcm.

The TBI ecm will operate two low impedance injectors. I don't happen to know what the impedance is for the Dodge / Holley TBI injector but if you find it we can answer the compatibility question.

The ecm will operate at 160 degrees. You can adjust engine operating parameters to get the most from the engine at 160 degrees. Some folks using automotive TBI in a marine application have even figured out how to install an O2 sensor.

What size and HP engine are you working with?