85 IROC TPI 1227730 conversion from 1226870

[zaut]

I understand what you are saying but this is free to try. If autozone comes through with a AUJP memcal, I will go the preferred method. I am having a problem with the all the *.adx files for the S_AUJP mask. Everyone I try to laod causes tunerpro to lock up in "not responding." Anyone know why?

[Six_Shooter]

The MEMCAL modifications are on TGO, but it wasn't simply a jumper IIRC.

You don't need to get an AUJP MEMCAL, just use S_AUJP on a new EPROM.

[zaut]

TGO? Do you mean third gen organization?

I figured out my MAT problem. It was the 8D.XDX file I was using. I found another and the temp read correctly. At least now I know my wiring is correct.

[34blazer]

glad you got the IAT to show in the adx.


http://www.thirdgen.org/techboard/

[EagleMark]

If you post the 2 ADX files and let me know which one was correct I can correct the other.

[zaut]

The one that is not working correctly is 8D.ADX, the one that does work is 1227730_8d.ADX. I got the 8D.ADX to work by changing the equation with the editor. It is the 8D Frank.ADX file. I think it is correct!

[EagleMark]

OK so you got done what you needed right? Did you get a wrong ADX from out $8D info thread? If so I want to fix it.

I and others put a lot of effort into having good files, we actually have better and more GM files then TunerPro site... but then Def files are community built so we do our share!

[EagleMark]

I understand what you are saying but this is free to try. If autozone comes through with a AUJP memcal, I will go the preferred method. I am having a problem with the all the *.adx files for the S_AUJP mask. Everyone I try to laod causes tunerpro to lock up in "not responding." Anyone know why?

Close all dashboards, history tables, item lists and monitors.

Is it the JPsGood ADX then open or the origanal is an ADS and need to Import.