as long as read/write capability for other PCMs is possible/left open, i'm in when the low-cost cable becomes available.
as long as read/write capability for other PCMs is possible/left open, i'm in when the low-cost cable becomes available.
1995 Chevrolet Monte Carlo LS 3100 + 4T60E
Grade 1 question here ... "LS1 Flash Tool" ... Will this function only on specific LS1 pcm or does work on most common OBDII ecms?
Count me in for a cable and the full blown 'write' software when they are available.
Antus has offered GearHead-EFI.com to be the USA reseller of software and cables. We will be working on details and costs to get everyone going.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
This is sweet! The 411 pcm my yet be in my grasp.
I am definately keeping a close eye on this project.
79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy
93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver
99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.
awesome!
'86 Grand National
Has anyone with a avt cable other than eaglemark had a chance to try it? Its the same cable as tunercat uses for obd2 and I think there are a number of them around, but more in the USA than Australia. I expect it to be widely compatible but am looking forward to hearing how people go with it.
Originally Posted by RobertISaar
It is capable of others and will be upgraded as time allows.
Robert, do you have a bin for these? If so post it up here or over at DelcoHacking for Antus.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Posting Permissions
Reply With Quote
Bookmarks