progress so far:

- it loads logs (any number of logs) into efficient data structures for analysis
- it removes logs from these data structures without crashing.. this part took a lot of head scratching
- it 'maps' parameter columns, kinda, but not automatically yet. the important part is the column mapping data structures are complete
- the ui properly handles one and two o2 sensor vehicles in a way that doesn't look too crappy, this took a bit of work

i know it's not much, but it's a start.

next i work on the filtering engine including it's automated configuration, and try to build a dictionary system so i can get the parameter automapping off the ground

so here's where i could use some help

need to build lists of common adx column names for my dictionary file

LBLM=Left Blm,Bank 1 BLM,Left LTFT, they ideally are in order of rough likelyhood. not case sensitive

anyone care to browse some ADX files and help me with that? or at the very least, read their own ADX and give me the column names for:

BLM (L/R/SINGLE):
INT (L/R/SINGLE):
RPM:
MAP:
COOLANT TEMP:
MAF:
CLOSED LOOP ENABLE FLAG:
BLM ENABLE FLAG:
CURRENT BLM CELL:
WOT ENABLE FLAG: