The ultimate LT1 $$EE patch thread

[kur4o]

For a dual wideband setup you`d better use pins D12 and D21 or pins D27 and D31. The pullups resistors on this pairs match and there will be no ground potential difference between the two channels, thus more stable readings accross banks.
D12 and D21 have 50 kohm resistor.
D27 and D31 have 22.3 kohm resistor.

If you have troubles modifying the datastream it is a simple 2 bytes patch. Give me a note and will get an xdf for an easy reconfigure.