Results 1 to 13 of 13

Thread: Which is my BIN number

  1. #1
    Carb and Points!
    Join Date
    May 2021
    Age
    25
    Posts
    6

    Which is my BIN number

    Hey guys, newbie here so try not to hate on me, is the bin found on the back of the back of the ecm on the white tags? If so which ones the numbers on mine are as follows: 86yfxl913303et4p and 12587672

  2. #2
    Fuel Injected! trlrider's Avatar
    Join Date
    Jul 2020
    Location
    Geronimo, TX (Guadalupe County)
    Age
    58
    Posts
    177
    Neither!
    You will need to read to do a "Read" of the PCM to get the .bin - the numbers you posted are just service numbers.
    Jack of all trades, absolutely master of none! Too many projects, not enough time and limited funds.
    Geronimo, Guadalupe County, Texas
    1993 K1500 Suburban - SBC Refit retraining the TBI and Computer Control.
    2004 Z66 Avalanche 5;3 to 6.0 LQ9 upgrade - project pending

  3. #3
    Carb and Points!
    Join Date
    May 2021
    Age
    25
    Posts
    6
    Quote Originally Posted by trlrider View Post
    Neither!
    You will need to read to do a "Read" of the PCM to get the .bin - the numbers you posted are just service numbers.
    Okay awesome! Thanks so much!

  4. #4
    Carb and Points!
    Join Date
    May 2021
    Age
    25
    Posts
    6
    I have a second question would I be able to use a USB OBDII connector or does it have to be a Bluetooth connector for LS droid and tuner pro

  5. #5
    Fuel Injected! trlrider's Avatar
    Join Date
    Jul 2020
    Location
    Geronimo, TX (Guadalupe County)
    Age
    58
    Posts
    177
    I have used USB connections with my OBDXPro VT as well as Bluetooth for reading and flashing. I do recommend using a bench harness over trying to do it in the vehicle.
    Jack of all trades, absolutely master of none! Too many projects, not enough time and limited funds.
    Geronimo, Guadalupe County, Texas
    1993 K1500 Suburban - SBC Refit retraining the TBI and Computer Control.
    2004 Z66 Avalanche 5;3 to 6.0 LQ9 upgrade - project pending

  6. #6
    Carb and Points!
    Join Date
    May 2021
    Age
    25
    Posts
    6
    Does the obdxpro vt come with a cable or is it another adapter if it’s different where did you buy it and what is it’s name, I have made a bench harness to use thanks for all of your help

  7. #7
    Fuel Injected! trlrider's Avatar
    Join Date
    Jul 2020
    Location
    Geronimo, TX (Guadalupe County)
    Age
    58
    Posts
    177
    No it does not come with a cable. The port on the VT is a USB micro like the old Samsung phones use.
    It can be used USB or Bluetooth.
    Unfortunately due to chip shortages I do not it believe any will be available for several months.
    Some are using another device for USB , something Nanos!
    Maybe one of the regulars will check in on that.
    Jack of all trades, absolutely master of none! Too many projects, not enough time and limited funds.
    Geronimo, Guadalupe County, Texas
    1993 K1500 Suburban - SBC Refit retraining the TBI and Computer Control.
    2004 Z66 Avalanche 5;3 to 6.0 LQ9 upgrade - project pending

  8. #8
    Fuel Injected!
    Join Date
    Nov 2019
    Location
    Bossier City, Louisiana
    Age
    65
    Posts
    339
    Yes, I'm using the "VX Diag VCX Nano USB device" with PCM Hammer. Works great but you need to load the "Pass Thru" app on the disk to enable PCM Hammer to activate it as a J2534 device. Once that's done, the two connect at a speed four times faster than anything Bluetooth can muster.

    Rick
    1970 Chevy El Camino, LM7 Engine, 4L60E - Two 896 and two 0411 PCM's

  9. #9
    Fuel Injected! trlrider's Avatar
    Join Date
    Jul 2020
    Location
    Geronimo, TX (Guadalupe County)
    Age
    58
    Posts
    177
    Quote Originally Posted by B52Bombardier1 View Post
    Yes, I'm using the "VX Diag VCX Nano USB device" with PCM Hammer. Works great but you need to load the "Pass Thru" app on the disk to enable PCM Hammer to activate it as a J2534 device. Once that's done, the two connect at a speed four times faster than anything Bluetooth can muster.

    Rick
    That was it! Could not remember the whole name last evening!
    Jack of all trades, absolutely master of none! Too many projects, not enough time and limited funds.
    Geronimo, Guadalupe County, Texas
    1993 K1500 Suburban - SBC Refit retraining the TBI and Computer Control.
    2004 Z66 Avalanche 5;3 to 6.0 LQ9 upgrade - project pending

  10. #10
    Carb and Points!
    Join Date
    May 2021
    Age
    25
    Posts
    6
    Where is the best place to buy
    Last edited by Cdgeldart; 05-09-2021 at 12:18 AM.

  11. #11
    Fuel Injected!
    Join Date
    Nov 2019
    Location
    Bossier City, Louisiana
    Age
    65
    Posts
    339
    I got mine from Ebay for right at $100 but I see the price has gone up somewhat and I picked the blue-gray USB wired version to stay away from Bluetooth on Windows. I'm OK with Bluetooth on my Android phone and Kindle tablet that I also use for tuning but me, Windows and Bluetooth can't seem to get along.

    Rick
    1970 Chevy El Camino, LM7 Engine, 4L60E - Two 896 and two 0411 PCM's

  12. #12
    Carb and Points!
    Join Date
    May 2021
    Age
    25
    Posts
    6
    Is the “pass through” app a literal app or somthing in pcm hammer I’ve no experience with pcm hammer thanks in advamce

  13. #13
    Fuel Injected!
    Join Date
    Nov 2019
    Location
    Bossier City, Louisiana
    Age
    65
    Posts
    339
    The "J2534 Pass Thru" thing is on the disk that comes with the Nano and without that app being loaded, PCM Hammer can't recognize the Nano. The Nano will only be select-able within PCM Hammer if you do this.

    Rick
    1970 Chevy El Camino, LM7 Engine, 4L60E - Two 896 and two 0411 PCM's

Similar Threads

  1. Changing PCM OS number
    By ericwknapp12 in forum OBDII Tuning
    Replies: 4
    Last Post: 06-17-2020, 11:40 AM
  2. Help with number in code
    By myburb in forum GM EFI Systems
    Replies: 10
    Last Post: 11-15-2015, 11:55 PM
  3. 7747 ECM what BLM target number for Stoich 14.13 AFR?
    By babywag in forum GM EFI Systems
    Replies: 5
    Last Post: 03-26-2013, 12:59 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •