Yeah I've been working on it in spare time for a few days, it's in the moderators forum till I can get it done, probably tomorrow morning after a good nights sleep!
Stay Tuned!
Yeah I've been working on it in spare time for a few days, it's in the moderators forum till I can get it done, probably tomorrow morning after a good nights sleep!
Stay Tuned!
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Thanks Mark!Originally Posted by EagleMark
I'll keep my eyes open for an update - appreciate your work on this as it has been a little frustrating not having that functionality.
Cheers, Chris
BOOOOOOO, HISSSSSSSS.... Get off the stage!!!
:p
The man who says something is impossible, is usually interrupted by the man doing it.
Can I ban an Administrator?
Someone has been watching it in the Moderator forum cause it has lots of views...
I really wanted to get this right and have at least 14 hours into testing to get it right and double checked on a 160 Baud ADX and a 8192 Baud ADX, then another 6 or so doing the writeup and verifying. So I hope it comes in handy for those that want to use it!
http://www.gearhead-efi.com/Fuel-Inj...up-in-TunerPro
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
My AutoProm is on it's way, so can't wait to try out the details in that write up. :D
The man who says something is impossible, is usually interrupted by the man doing it.
Got my AutoProm today, I've only plugged it in to get TurnerPro to detect it, but I'm excited about using it.
I haven't seen any documentation on the Honda side of it though.
The man who says something is impossible, is usually interrupted by the man doing it.
I don't think it does motorcycles or lawnmowers?
There's a jumper inside that needs to be changed, you have to open it to see it. I've never seen anything on it either but supposed to work?
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Yeah, I had mine open, that why how I saw the "Honda" part. ;)
There was also the 4 pin plug above the EMU cable connection, that looked Honda interface-ish to me, along with a second one inside.
I want to know what all of the connects are for! lol
The man who says something is impossible, is usually interrupted by the man doing it.
Posting Permissions
Reply With Quote
Bookmarks