If I understand correctly, this tool is able to support the green/ble PCM's too? Once I actually open the app up, I'm not sure I understand what's supported as it says "Works with GM 411 type PCM's", but on this thread http://pcmhacking.net/forums/viewtopic.php?f=3&t=3111 I see note of the 1mb LS1's as well...but I guess they're actually different tools from different programmers?
Either way, this is awesome.
Last edited by MikeOD; 11-29-2014 at 06:31 PM.
That's my question as well. Is this the finished product started by Antus or is this a different program?Originally Posted by MikeOD
Jeff
98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.
It appears to be a different application. If you read the thread I referenced above you'll see the author adapted an app he wrote for the blackbox PCM to the 0411.
They are different, used both and they work very different. Antus's tool has not been updated in a while and has no write capabilities yet
Both great tools tho
Are we still looking for a 5th person to pitch in for a cable? Just read the entire thread and am super stoked about this! Working on catching up on C++ and one day (far, far into the future) I'd be able to help with the programming of this project. I'm a Systems Engineer by trade (because I couldn't make enough money as a wrench bender)
Sorry, your 2 years late. The cables were ordered and distributed. Sadly the organizer of the purchase EagleMark passed away. Antus software has not advanced either, although reads and changes vins very well.
delete
Last edited by beenba; 05-30-2017 at 05:15 PM.
Well, actually... Antus and I, and a couple other guys, have been working on a rewrite of his software, and while there's still more to be done, it's basically working now. It mostly just needs more testing to shake out the bugs, and some extra validation to prevent people from shooting themselves in the foot.
It supports the same AVT cables as his original version, but it also supports the USB version of the AllPro interface, which is only about $40. Or J2534 tools. Or the ScanTool SX, though that's relatively slow.
http://pcmhammer.org - this will redirect to GitHub. Click "Releases" and download the most recent one.
http://www.obddiag.net/products.html (No affiliation, I just really like this product.)
Last edited by NSFW; 01-18-2019 at 06:39 AM.
I love the Xpro VT cable.
Full read 2 min 24 sec. Full write 1 min 9 sec. on a 0411 pcm.
This is some assume software NSFW.
full read resized.jpgFirst write resized.jpg
Posting Permissions
Reply With Quote
Bookmarks