Any one try Fgtech v54

[2ss8]

Fgtech supposes to read/write E38 but I have not tried writing yet

[Montecarlodrag]

Fgtech supposes to read/write E38 but I have not tried writing yet

Edit:
You say you did a read with the ECM in the car, it was using the OBD2 port or the BDM?

[2ss8]

Yes, I was able. I chose E5 corvette for E38

[skandolis]

i was never able to get clone galleto v54 to even read 411 (or anything for that matter) tried as tahoe and as vette always tries to read, relays click, then get message error wake (bench harness through obd2 port) chalked it up to a waste of 50 bucks.............

[roughneck427]

i was never able to get clone galleto v54 to even read 411 (or anything for that matter) tried as tahoe and as vette always tries to read, relays click, then get message error wake (bench harness through obd2 port) chalked it up to a waste of 50 bucks.............

I had the same result on teh 411 ecm. I was able to do a BDM read on a LMM Duramax ECM though. I wonder if its a cable or software issue? 2ss8 can you share the software version you have?

[2ss8]

I'm gonna post that today or tomorrow. with pics