Now that the VE table is smoothed out we can do some data logging.

To get better data logs there are a few more things to do that helps for accurate data and filling more cells.

Turn off:
1. EGR
2. PE.
3. Air pump.
4. DFCO
5. Hiway Lean Cruise if applicable.

Have vehicle warmed up and driven a little, then start data log. Try and have a route planned where you can drive a steady throttle state, like getting on the freeway at 10% throttle till top speed or whatever is safe. Next on ramp 20%, then 30%, 40%, 50% etc... your coming off freeway and getting back on helps for other data or do some around town driving.

Do not look at history table while driving!!!

But do try and fill in as many cells as possible. You will not get them all, it's impossible. Save your data log.