Results 1 to 7 of 7

Thread: Looking for xdf info for Mefi 5

  1. #1
    Carb and Points!
    Join Date
    Sep 2015
    Age
    33
    Posts
    2

    Looking for xdf info for Mefi 5

    Hello,
    I am sure this is being posted in the wrong area, but being my first I thought it should go here.

    New to the site, have been looking through the forums as a guest for some time. I am actively looking for more information on xdf and bin files for a 2008 2.4l ecotec engine with a mefi 5 box.

    more specifically, any data to support an issue with the controller cutting the rpm at 8000 rpm. In my .bin, I have the rev limiter set at 8800 and clamp limit set to 8500.

    Our motor is mechanically built to handle the increase in RPM, so I am convinced it is an electronic problem.

    Any info/advice/trolling would be apreciated.

    Thanks,
    - Bobby w/ Jet Motorsports

  2. #2
    Carb and Points!
    Join Date
    May 2014
    Posts
    9
    What are you using to tune this?

    Can you post your bin file?

  3. #3
    Carb and Points!
    Join Date
    Sep 2015
    Age
    33
    Posts
    2
    I am using TunerPro, and the MefiBurn module.

    The XDF was given to us from a third party outside of MefiBurn and Bob. He was able to verify the issue and fix it, but stated there were "green tables I cannot see"

    Is this something in the XDF that is preventing me from making changes? Is this a firmware issue with the controller as safety? Thanks in advance

  4. #4
    Whats the service/hardware # on the ECM? I ask that because not all the ECMs are true MEFI 5 and there are only a few that MEFIBurn can handle.

  5. #5
    Fuel Injected!
    Join Date
    Dec 2012
    Age
    39
    Posts
    25
    Quote Originally Posted by Skinny Pedal View Post
    Whats the service/hardware # on the ECM? I ask that because not all the ECMs are true MEFI 5 and there are only a few that MEFIBurn can handle.
    I’m looking to share mefi5 bin files, I have a ls7, I’d be interested in comparing other bins

  6. #6
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811
    COPO camaro with supercharger from about 7 years ago.
    Attached Files Attached Files
    -Carl

  7. #7
    Fuel Injected!
    Join Date
    Dec 2012
    Age
    39
    Posts
    25
    I'm looking for more xdfs and bin files for the mefi willing to trade

Similar Threads

  1. MEFI-3 & 4 CAN Protocols
    By KidTurbo in forum GM EFI Systems
    Replies: 10
    Last Post: 07-12-2019, 01:41 PM
  2. L29 head 454 MEFI tune
    By roughneck427 in forum OBDII Tuning
    Replies: 20
    Last Post: 08-16-2015, 01:03 AM
  3. ramjet 350 mefi 3 reflashed
    By Steve Samford in forum TunerPro OBDII
    Replies: 2
    Last Post: 07-07-2015, 10:24 PM
  4. Looking for MEFI 5 or 5a bin files with 24x motor E67
    By 04colyZQ8 in forum Other EFI systems and related topics
    Replies: 0
    Last Post: 09-05-2014, 07:02 AM
  5. MEFI 3 Question
    By 800xcr in forum Introductions
    Replies: 9
    Last Post: 05-22-2014, 06:25 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •