Awesome !!! I've been wanting to see these tables for a long time now ! I'm curious about a couple values that you would have to be able to see some of the other parameters the PCM/VCM uses to calculate the "total" or "actual" timing. I would like to see what the typical timing value is at idle and what the total timing advance looks like at WOT throughout the RPM range. The way that I have the timing parameters set in my 7427 PCM is that there is no advance added while in PE. So, when looking at the open throttle timing table, the values in the 85-100kpa range reflect the total timing. Overall, the timing tables that I am using currently are surprisingly similar to these tables. Thanks for putting these up for people to see. I know that at least for me, the most difficult aspect of tuning after swapping in the vortec was the timing tables. Vortec heads are so sensitive to timing curves and are a bit different than traditional cast iron heads so they can be a challenge.