So after reading the info you suggested I have a question. For the kickdown to function, I have to wire in a relay to the solenoid? Im just looking for stock shifting so Im not clear about that bit.
thanks
So after reading the info you suggested I have a question. For the kickdown to function, I have to wire in a relay to the solenoid? Im just looking for stock shifting so Im not clear about that bit.
thanks
Yes, need a relay. This is the same way that GM did it:
http://dynamicefi.com/EBL_Drawings_Images/3of4.jpg
Which is part of this page:
http://dynamicefi.com/EBL_Drawings.php
RBob.
Ok, thanks for confirming that.
Bookmarks