Results 1 to 15 of 168

Thread: Starting to Learn on 95 G30 5.7 for Towing

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #34
    Fuel Injected! donf's Avatar
    Join Date
    Apr 2017
    Location
    Oregon
    Posts
    275
    Quote Originally Posted by Roadknee View Post
    Hi Don. I was pretty active tuning my stock 1995 K1500 several years ago. My tuning threads are here:

    I've attached my bin if you want to have a look at it. Truck has nearly 180,000 miles on it now. Same stock LO5 and 4L60e.
    Thank you I will take a look! I am sure there is some good stuff in there. Billy Graves has already helped me too with some trans help.

    Quote Originally Posted by Fast355 View Post
    I read a Hypertech I found in a 92 GM van once. For $2 at the wrecking yard. All they did is target a leaner PE mixture and increase the VE table and spark map in the 80+ KPA range. I tried it and WOT it actually ran very well but no changes to anything that would effect emmisions.
    No PE changes in the Jet chip. I did not bother to dyno it. I took it out after one trip pulling the trailer and dyno to the track. A lot of the changes were in the rpm ranges well past the limits of a stock 350 tbi. Every change over the stock chip is shown in this screen shot.

    Last edited by donf; 06-17-2018 at 04:47 PM.

Similar Threads

  1. Towing with T56
    By CDeeZ in forum Gear Heads
    Replies: 73
    Last Post: 05-14-2018, 02:43 AM
  2. Starting over
    By old truck guy in forum GM EFI Systems
    Replies: 1
    Last Post: 03-12-2016, 11:27 PM
  3. Suggestions for a starting bin
    By 88tpix2 in forum GM EFI Systems
    Replies: 1
    Last Post: 04-17-2014, 01:11 AM
  4. Tuning for towing?
    By dyeager535 in forum GM EFI Systems
    Replies: 13
    Last Post: 04-10-2012, 09:18 PM
  5. Starting Fresh
    By Six_Shooter in forum Gear Heads
    Replies: 2
    Last Post: 03-04-2011, 02:19 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •