Ok been tuning my newly build engine and have the tune in the ballpark. I am putting my Bin up as a start point for those who wish to use it as a start point for there build.
Engine specs are as follows
350 bottom end with a 395 GM cam (no advance or retard)
Vortec Heads with 1.5 ratio roller tip rockers
Static compression ratio 9.8-1
GM vortec to TBI inlet manifold bored out too 2"
Holley TBI with 65lb injectors
Fuel is our standard Australian 91 ron
ECM 16197427
Base tune Eprom BJYL
Hope it helps some one who has as similar set up.
Bookmarks