Tuning for Mild Cam, Headers, etc....

[Davis_1377]

Oh I done that before I first wrote you, I thought you was wondering what all I tried.

I used the jet 2 for this if that was the best thing to do. I set the desired idle speed on 850 and the spark table on 22. Did you want the whole table at 22 or just around idle cause I set it there at about idle? At a point it idled up to a part of the SA table i didnt move that was about 26 degrees.

Heres the log I believe the way you wanted. I had to drive alittle to get into closed loop. It has a 180 degree thermostat also.