i installed the new custom os and tune what do i need to do to get it started now
i installed the new custom os and tune what do i need to do to get it started now
The MAP and Injector data in that tune are wrong for your setup. I set it for a 2bar MAP---You still have a 1bar. The injector data in that tune is not stock. Your injectors are stock. You need a 2 bar MAP and either input your stock injector information in it or wait and install your new injectors and input the data from them. The COS3 I posted was not intended to run your engine in its present state.
Jeff
98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.
ok i should get my map and injectors next week do you know what injectors it was set for
Bookmarks