how do you tell TBI injectors apart? I'm lost and even have a pic

**stackz** · 06-05-2023

thanks for the info guys. I'm guessing the four injectors I posted originally are all aftermarket or something. I cleaned them all off to the point I can see the machining marks and no numbers. maybe they were printed on and not etched into the metal surface? oh well. I will just continue with my bags I guess.

**stew86MCSS396** · 06-05-2023

Yeah about that...I had a few that had slight surface corrosion and had the same result after trying to clean it up.

**PlayingWithTBI** · 06-06-2023

Originally Posted by stackz

thanks for the info guys. I'm guessing the four injectors I posted originally are all aftermarket or something. I cleaned them all off to the point I can see the machining marks and no numbers. maybe they were printed on and not etched into the metal surface? oh well. I will just continue with my bags I guess.

You can send them out to be cleaned and flow tested. Then scribe an equivalent number on them so you can readily recognize them when mixed together.

**stackz** · 06-06-2023

Originally Posted by PlayingWithTBI

You can send them out to be cleaned and flow tested. Then scribe an equivalent number on them so you can readily recognize them when mixed together.

I mean, I guess will just mark them myself real quick with a razor blade before I forget what they came from. by the time I pay for shipping/flow test, etc I might as well just buy a new one.