Results 1 to 15 of 83

Thread: Inline 6 on a 0411 pcm

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,345

    Cool

    Possibly pictures of the distributor will be shared?

    dave w

  2. #2
    Fuel Injected!
    Join Date
    Jan 2019
    Location
    Commerce Ga.
    Age
    65
    Posts
    83
    Quote Originally Posted by dave w View Post
    Possibly pictures of the distributor will be shared?

    dave w
    I'm using the stock distributor from a 1996 Cherokee.

    signal-2021-10-21-163352.jpg
    signal-2021-10-21-163336.jpg

  3. #3
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,345
    Quote Originally Posted by Thorwon View Post
    I'm using the stock distributor from a 1996 Cherokee.

    signal-2021-10-21-163352.jpg
    signal-2021-10-21-163336.jpg
    Any modifications required to the Stock 1996 Distributor?

    dave w

  4. #4
    Fuel Injected!
    Join Date
    Jan 2019
    Location
    Commerce Ga.
    Age
    65
    Posts
    83
    Quote Originally Posted by dave w View Post
    Any modifications required to the Stock 1996 Distributor?

    dave w
    Just had to change the wire plug. I did the same with the TPS and the IAC plugged in and seams to be working.
    I don't have the 02 sensors installed yet so it's running open loop.

  5. #5
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,345
    Quote Originally Posted by Thorwon View Post
    Just had to change the wire plug. I did the same with the TPS and the IAC plugged in and seams to be working.
    I don't have the 02 sensors installed yet so it's running open loop.
    For sure . . . the devil is in the details

    dave w

  6. #6
    Fuel Injected!
    Join Date
    Jan 2019
    Location
    Commerce Ga.
    Age
    65
    Posts
    83
    Quote Originally Posted by dave w View Post
    For sure . . . the devil is in the details

    dave w
    Dave this system runs two 02 sensors. But the manifold only has one bung in it. Do you think I can get away with hooking both inputs to one 02 sensor?
    I just don't want to have to pull the exhaust manifold off again, it's a P I A.
    Here's another video of it running.


  7. #7
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,345
    Quote Originally Posted by Thorwon View Post
    Dave this system runs two 02 sensors. But the manifold only has one bung in it. Do you think I can get away with hooking both inputs to one 02 sensor?
    I just don't want to have to pull the exhaust manifold off again, it's a P I A.
    Here's another video of it running.
    I'm guessing, but I think two O2 sensors in a single exhaust is mostly OK. I'm thinking GM used Bank Assignments on V6 / V8 engines for Fuel Trims . . . for error codes Bank 1 / Bank 2 rich or lean. Theoretically (I think), both O2 sensors in a single exhaust would simultaneously trigger Bank 1 / Bank 2 rich or lean errors and simultaneously correct to the same rich / lean fuel trims?

    What happens when one spark plug fails in the inline 6 with two O2 sensors in a single exhaust causing "All Banks" to run rich is anyone's guess how the engine will perform or cause potential engine damage? What happens when one O2 sensor fails with two O2 sensors in a single exhaust is anybody's guess what "All Banks" will do for engine performance or potential engine damage?

    dave w

Similar Threads

  1. 427 TBI ECU from 350 on a 250 Inline
    By Rat Chevelle in forum GM EFI Systems
    Replies: 10
    Last Post: 04-13-2020, 04:33 PM
  2. 12v inline timer
    By EDZIP in forum Gear Heads
    Replies: 2
    Last Post: 03-14-2019, 10:33 PM
  3. opinions for turbo inline 6
    By myburb in forum GM EFI Systems
    Replies: 4
    Last Post: 07-17-2017, 09:33 PM
  4. TBI on inline 6
    By chevy80 in forum GM EFI Systems
    Replies: 9
    Last Post: 12-17-2014, 04:02 AM
  5. Inline pictures
    By historystamp in forum GearHead EFI Forum Support
    Replies: 2
    Last Post: 01-10-2012, 12:29 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •