bgott,

Yes, Moates tech support folks are super. With regard to latency, I had read somewhere to put it way down. I have mine at 1.

Ok, you've stated that the only problem you're having is the intermittent loss of data and/or comms connection when cruising and data logging. Correct? If this is correct, you are experiencing the same thing as Stew and I. The problem was solved when we installed individual jumper wires between the ALDL connector on the truck to the ALDL end of the Moates wire (this wire has the Cat5 plug on one end and the ALDL plug on the other--pictured above). The 3 wires needed are Pins A, B, and E.

Dave W told us that sometimes if you connect the ALDL plug on the Moates APU1 wire directly onto the ALDL in the car, the signals/impluses from the other wires cause interference. Once we isolated the input and connected them directly to the APU1, the inconsistent comms problem went away.

Give that a shot!