'7747 Flash Chip Conversion (27SF512)

[southforkcnc]

So I am verifying this before I start soldering the parts into my board. Do the last 4 pins on the ZIF socket (The ones the new wire is soldered to) need to be cut shorter to clear the board. And the 5th pin does not get cut shorter and gets soldered back into the original hole on the board?

[ony]

I would get a g2 adapter.

[dave w]

So I am verifying this before I start soldering the parts into my board. Do the last 4 pins on the ZIF socket (The ones the new wire is soldered to) need to be cut shorter to clear the board. And the 5th pin does not get cut shorter and gets soldered back into the original hole on the board?

The bottom 24 pins do not get cut.

dave w