Results 1 to 8 of 8

Thread: First drive - TPI truck

  1. #1
    Fuel Injected!
    Join Date
    Apr 2017
    Location
    DFW
    Posts
    43

    First drive - TPI truck

    It seems to drive fairly well. I logged data to my tablet as a drove around for about 5 minutes, then just looked over the CSV tonight out of curiosity. I dont have anything to diagnose, but I noticed these fuel trim numbers. If they are normal then Ill ignore it. If not then Ill learn tunerpro and dig deeper.
    Attached is just a simple graph of the INT and BLM values from the values the app dumps to a CSV.
    Attached Images Attached Images

    1992 Camaro Z28 5.7
    1995 Silverado 5.7 TPI

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    The BLM's would ideally average 128. By the looks of the posted graph, it seems likely the BLM's are averaging less than 128. BLM's below 128 are rich and BLM above 128 are lean. Overall, the csv indicates the truck is running rich.

    dave w

  3. #3
    Fuel Injected!
    Join Date
    Apr 2017
    Location
    DFW
    Posts
    43
    Thanks. 105-110 is low enough to worry about?
    I don't know if it matters, but the EGR is disabled.

    1992 Camaro Z28 5.7
    1995 Silverado 5.7 TPI

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    Quote Originally Posted by pro View Post
    Thanks. 105-110 is low enough to worry about?
    I don't know if it matters, but the EGR is disabled.
    I think 105 - 110 is to low, I think 118 - 138 is acceptable. The closer to 128 the better.

    dave w

  5. #5
    Fuel Injected!
    Join Date
    Apr 2017
    Location
    DFW
    Posts
    43
    Would you also recommend lowering the values in the VE table (I suppose it's idle VE vs MAP vs RPM)?
    In looking at more data, in most of the cases where BLM was at 110 and near 105, MAP was around 35, and RPM 650-800. Thats only a few cells in the attached table correct? Do the values in this table not seem to be a bit high in the first place?
    Attached Images Attached Images

    1992 Camaro Z28 5.7
    1995 Silverado 5.7 TPI

  6. #6
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    I think using the Log File Analyzer posted in this thread will be very helpful: http://www.gearhead-efi.com/Fuel-Inj...-File-Analyzer

    I've been very successful tuning TPI with the Log File Analyzer.

    dave w
    Last edited by dave w; 10-11-2017 at 02:07 PM.

  7. #7
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Euless, TX
    Posts
    2,308
    Quote Originally Posted by dave w View Post
    I think using the Log File Analyzer posted in this thread will be very helpful: http://www.gearhead-efi.com/Fuel-Inj...-File-Analyzer

    I've been very successful tuning TPI with the Log File Analyzer.

    dave w
    I believe he is still running the 1993-1995 TBI PCM to run the TPI. He would be running a $0D setup, not $8D.

  8. #8
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    Quote Originally Posted by Fast355 View Post
    I believe he is still running the 1993-1995 TBI PCM to run the TPI. He would be running a $0D setup, not $8D.
    If using $OD, then there is the option to use the Wide Band O2 spreadsheet posted in this thread; http://www.gearhead-efi.com/Fuel-Inj...g)-Spreadsheet Requires installing a Wide Band O2. Instructions for setting up $OD for Wide Band O2 data logging is included in the .zip file.

    dave w

Similar Threads

  1. Replies: 10
    Last Post: 11-25-2015, 05:23 PM
  2. Park / drive issues
    By Scorp1us in forum GM EFI Systems
    Replies: 5
    Last Post: 06-10-2014, 07:10 AM
  3. DIY CNC from floppy drive parts
    By User Nameless in forum Gear Heads
    Replies: 5
    Last Post: 04-07-2014, 01:03 AM
  4. Don't tune and Drive! FastEddi look here!
    By EagleMark in forum Gear Heads
    Replies: 33
    Last Post: 05-07-2012, 02:29 AM
  5. Don't text and drive...
    By EagleMark in forum Gear Heads
    Replies: 2
    Last Post: 02-24-2012, 04:40 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •