This forum is set to allow most any file we need and I'm sure Datamaster is one. Let me know if there is an issue.
This forum is set to allow most any file we need and I'm sure Datamaster is one. Let me know if there is an issue.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Here is one of the Datamaster files
2 More
Looks rich to me, based on the Histogram tables I've posted screen shots for. I'm not sure if the rich condition is near idle or open throttle, maybe both? I noticed a fault code 42 in log 2.
dave w
Yea in log 2 I guess the timing connector wasn't plugged all the way in? Top of the plug reads rich idle I think
There was thread a few months ago about being able to make corrections yourself with MS Access Spreadsheet. http://www.gearhead-efi.com/Fuel-Inj...ghlight=vecals
The VECALS 4 .zip is in the tread. Instructions are included in the .zip. The VECALS spreadsheet is designed to work with TunerPro RT. You will need to read the .bin file in your chip. VECALS will do all the "MATH" to correct the "RICH" settings in your current .bin. I'm not sure what TBI Chips is using to correct .bin files?
dave w
For some reason, this conversation has me thinking back to a thread on another forum regarding 2 ignition modules for TBI, pertaining specifically to spark latency settings matching what is in the ecm.
Pretty sure all the 94 5.7L Spark Latency are same in mask. Modules are same too if ordered for same. There's a latency issue with some early TBI truck and cars, but thats only a few degrees, many more degrees from aftermarket. (Large cap HEI is again totally differant.) We don't even know which one he has. One of his symptoms sounds like a faulty EST and he ordered a GM. But I don't think that's the overall issue?
There's also a code 42 (EST) that needs to be cleared and see if it returns. It also sets when disconnecting bypass wire for timing.
There is something weird about stock chip to aftermarket though? Won't know unless we could read them? Still pig rich if a fairly new plug has black on ring? I'd have all the plugs pulled by now... checked fuel pressure.... vacuum reading.... data log.... have someone with a strong heart check spark plugs wires and coil for arcs...
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
could the possibility of having headers be the issue? I know on mine the headers made my NBo2 voltages way off from stock causing blm's to read wrong compared to my WB02. add that then a cam that has a little more valve overlap than stock. This was one of the first things I banged my head against when I started tuning. I only realized what was happening when I installed the WB02
87 4Runner, 15" spring lift, 3" body, chevy vortec 355, 5.29 gears, 38.5x15.5x15" Boggers, 280hr, 16168625 running $0D
93 S10, 36x12.5x15 TSL's, custom turbo headers, 266HR cam, p&p vortec heads, $0D Marine MPFI with 8psi boost.
05 Silverado, 2' lift, 4" exhaust, Bully Dog programmer,
I'm thinking with shorty headers, provided the single wire O2 sensor is still located near the stock exhaust manifold location, is not going to have an effect on overall rich / lean data. I have shorty headers on my 93 K1500, and have not seen any issues with the single wire O2 sensor I'm using. The shorty headers I'm using have the O2 sensor in same locaion as the original stock exhaust manifold did.
Long tube headers using a single wire O2 sensor can be a real problem!
dave w
Bookmarks