VSS from tranny change

[duPont Registry]

My truck friends tell me that for trucks that have reluctors, there is no groove on the output shaft for the retainer clip.

My Speedo and odometer are working, just reading really fast due to 40 pulses. I might bite the bullet and change the jumpers around for 40 pulses and see what happens.

I just dont know if my VSSB will be happy with square wave vs older analog input...

Any other thoughts are welcome,

Thanks Guys

[droptopstng]

My truck friends tell me that for trucks that have reluctors, there is no groove on the output shaft for the retainer clip.

My Speedo and odometer are working, just reading really fast due to 40 pulses. I might bite the bullet and change the jumpers around for 40 pulses and see what happens.

I just dont know if my VSSB will be happy with square wave vs older analog input...

Any other thoughts are welcome,

Thanks Guys

Well I
don't think. I have ever seen a groove on a 60 or 60e but all 2wd outputshafts have 2 holes in them for the gear or ring