WBO2-Tuning Spreadsheet

**dave w** · 03-09-2017

Originally Posted by Chewy1576

Awesome work on the spreadsheet Dave! I have a few questions - What filters are you using for the averageifs on WBO2 and SA history tables? I copied in a set of data from a log I had to try it out and I'm not seeing any data populating in the history tables? The columns in the Insert Datalog sheet match up. Also for this log, I forced Open Loop and PE is disabled.

Can you post your .xdl file? I filter out ALL open loop data. Maybe in the future I can set up a sheet for Open Loop. I have a sheet for PE only.

dave w

**Chewy1576** · 03-09-2017

Originally Posted by dave w

Can you post your .xdl file? I filter out ALL open loop data. Maybe in the future I can set up a sheet for Open Loop. I have a sheet for PE only.

dave w

I'm pretty sure it was this one. The Open Loop thing is probably it then.

**dave w** · 03-10-2017

Originally Posted by Chewy1576

I'm pretty sure it was this one. The Open Loop thing is probably it then.

I changed all the values in Column "AJ" to Closed and the spreadsheet worked, see attached screen of near idle table with Column AJ set to closed.

dave w

**Chewy1576** · 03-10-2017

Originally Posted by dave w

I changed all the values in Column "AJ" to Closed and the spreadsheet worked, see attached screen of near idle table with Column AJ set to closed.

dave w

That's a good idea. Thanks for the insight Dave.